Can you obtain this information?
If so, pm me and I may be able to help you.
Hello,
Can anyone please share the firmware version 00.01.12 ? I want to get the log x-axis on my unit. My Digital FPGA board revision is 00.04, so I can't really upgrade to the latest 01.19 revision.
Thank you,
00000000 - File Type: DSA800
00000010 - Version: 00000001
00000014 - # Sections: 23
Offset StartAdr SectiSz LoadAddr CRC32
00000018 0000012C 00004FC4 002EC1B0 [0000012C-000050EF] 64CFEB60
00000024 000050F0 0003C1B0 002B0000 [000050F0-0004129F] A4370BCB
00000030 000412A0 0000768B 00340000 [000412A0-0004892A] 5E9CAB87 Messages Strings
0000003C 0004892C 00004103 00350000 [0004892C-0004CA2E] 2A1DDCFB
00000048 0004CA30 00000A87 00360000 [0004CA30-0004D4B6] 6E34A148 Menus Strings
00000054 0004D4B8 0000189D 00363000 [0004D4B8-0004ED54] D3BB87A7 Menus Strings
00000060 0004ED58 0000172E 00366000 [0004ED58-00050485] 89D6BC3A Menus Strings
0000006C 00050488 000024BA 00369000 [00050488-00052941] C4A2148D
00000078 00052944 00003010 0036C000 [00052944-00055953] A2B75774 Language Strings
00000084 00055954 00003484 00290000 [00055954-00058DD7] 43D2459E Language Strings
00000090 00058DD8 0000326C 00294000 [00058DD8-0005C043] 3AADF316 Language Strings
0000009C 0005C044 00001F92 00298000 [0005C044-0005DFD5] 38DEF018
000000A8 0005DFD8 000015D4 0029C000 [0005DFD8-0005F5AB] 95D48AF4 Menus Strings
000000B4 0005F5AC 000180F4 00300000 [0005F5AC-0007769F] 70B6F010 SCPI Commands Help
000000C0 000776A0 000115DA 00320000 [000776A0-00088C79] 77E4920C SCPI Commands Help
000000CC 00088C7C 000C4091 00180000 [00088C7C-0014CD0C] AD2E0BE1 FPGA .bit
000000D8 0014CD10 00011C52 00270000 [0014CD10-0015E961] E17D4E68 FPGA .bit
000000E4 0015E964 00011C52 00270000 [0015E964-001705B5] 7FAC1865 FPGA .bit
000000F0 001705B8 0000165D 002A0000 [001705B8-00171C14] 08F72B5D I2C EEPROM - VID: 0547 PID: 2131
000000FC 00171C18 000C58C3 00080000 [00171C18-002374DA] 0FB5672A LZMA app block
Decompressed LZMA block [00171C18-002374DA] Comp Sz: 000C58C3 Decomp Sz: 002B4C90
00000108 002374DC 00000005 00370022 [002374DC-002374E0] 43CBA051 FW Version: 00.01.19.00.03
00000114 002374E4 00000004 0037F000 [002374E4-002374E7] E295A55E "0002"
00000120 002374E8 00022374 00150000 [002374E8-0025985B] 97495F89 LZMA FPGA .bit block
Decompressed LZMA block [002374EC-0025985B] Comp Sz: 00022370 Decomp Sz: 000C3F7D
From memory, I was able to update to version 01.18, but then the DSA no longer booted. The error was, I had omitted the version 01.13 and the FPGA board was not updated to the version 00.05. Only after I updated the versions from 01.12 to 01.18 one after the other, the version 01.18 worked again.
Mr. tv84,
THANK YOU VERY MUCH INDEED for helping me to unlock the Licensed options!
My appliance has became much more valuable right now.
5 stars!!!
Hi All,
my DSA815-TG shows this info:
Version of Main Board: 00.09
Version of Radio Frequency Board FPGA: 00.05
Version of Digital Board FPGA: 00.05
Version of Firmware: 00.01.19
Version of Boot: 00.01.04
Serial# Option Option Type Active
1 TG-DSA800 Official Y
2 AMK-DSA800 Trial Y
3 EMI-DSA800 Trial Y
4 VSWR-DSA800 Trial Y
5 SSC-DSA None N
I have crawled through the thread. This is what I have understood:
- Boot 00.01.04 does not allow to downgrade to use riglol to permanently enable AMK, EMI, and VSWR.
- Connecting pin7/8 at u1105 prevents the remaining count-down trial time to be written to FRAM. With a permanent connection between pin7/8, some system settings will also not be written (LAN settings, USB settings, calibration data?).
=> What exactly are the settings, not stored?
- When using a switch between pin7/8 of u1105 the DSA must be switched off, then the switch may be altered, then the DSA can be switched on again. NEVER alter the switch while running the DSA or some data might get corrupted. And: Every time the DSA is started with pin7/8 open to allow changes to be written, a little amount of trial time will get lost again.
- Some guys reported that some other features/functions might not work or some erroneous behaviour might occur when using the dsa while pin7/8 are connected.
=> Right or wrong?
- There shall be an alternative solution using a PIC, that somehow prevents the trial time to be written. I have only read that there is a PIC solution, but nothing further.
=> Please can someone give a link or further information on that point?
=> Besides that, is there any option to enable SSC-DSA?
=> Are there other options I have not read?
Many thanks,