Author Topic: New Member, Please introduce yourself (Read 1751934 times)

samadamsuk · « **Reply #2725 on:** July 18, 2020, 03:53:23 pm »

Welcome!

CoolePascal · « **Reply #2726 on:** July 20, 2020, 12:17:10 pm »

Hi from the south of the Netherlands, background in aviation, ict (unix/linux) and currently embedded engineer.
Fond of fpga's, microcontrollers, dsp, sdr and playing a whole bunch of musical instruments.
Being a licenced ham on this forum is probarly common.

mario5000 · « **Reply #2727 on:** July 20, 2020, 02:29:49 pm »

Hello from Greece. My name is Mario i'm Electronics Eng. but i work as a Technician (here in Greece the things are difficult) over 4years and i repair usually boards from consuming devices like washing machines, refrigerators, air conditions and some times cellphones, pc, tablets, etc. I start as enthusiast at the age of 7? (cannot remember) when i made my first circuit.

stefan_trekkie · « **Reply #2728 on:** July 20, 2020, 06:55:12 pm »

Quote from: mario5000 on July 20, 2020, 02:29:49 pm

Hello from Greece. My name is Mario i'm Electronics Eng. but i work as a Technician (here in Greece the things are difficult) over 4years and i repair usually boards from consuming devices like washing machines, refrigerators, air conditions and some times cellphones, pc, tablets, etc. I start as enthusiast at the age of 7? (cannot remember) when i made my first circuit.

Hello neighbor. Similar here. The curious thing is that i was for some time in Greece company, working on automation, plcs, industrial stuff .. But they had taken the machines back to Greece last year. After that i had information that they need more people for the same machines and had offer me to go there.. 500 km, it's not that long of a ride.. But stupid me

blackbird · « **Reply #2729 on:** July 21, 2020, 12:13:31 pm »

Quote from: CoolePascal on July 20, 2020, 12:17:10 pm

Hi from the south of the Netherlands, background in aviation, ict (unix/linux) and currently embedded engineer.
Fond of fpga's, microcontrollers, dsp, sdr and playing a whole bunch of musical instruments.
Being a licenced ham on this forum is probarly common.

Welcome on this forum Pascal. Apart from playing musical instruments my background is comparable to yours, i.e. aviation, unix/linux, embedded engineer and ham....

EngineerTheVoid · « **Reply #2730 on:** July 22, 2020, 07:18:43 pm »

Hello everyone! My name is Kyle and I'm from Los Angeles, CA.

I am currently studying Electrical Engineering at a local university. I have work experience and a deep interest in control systems and industrial automation. I also mess around with programming, 3D printing, Raspberry Pi's and computers.

I look forward to meeting you all and learning even more!

abumbalough21 · « **Reply #2731 on:** July 22, 2020, 08:40:52 pm »

Hi everyone, my name's Austin! I live in the U.S. and I'm a senior EE student at the University of Alabama in Huntsville. I'm passionate about music, having played drums since I was 10 years old, and tinkering with audio gear is what got me interested in electronics. I hope to one day work for an audio electronics company doing hardware design and maybe even write some embedded firmware while I'm at it. My other interests include reading about psychedelia, discovering new music, playing disc golf, and linux computing.

Feel free to reach me on the web at my personal site, https://austin.bumbalough.xyz

MuhScopeBroke · « **Reply #2732 on:** July 24, 2020, 05:53:11 pm »

Hello EEVblog, just an EE student look to observe our odd engineering community. General Chat is crazy to read so I needed an account to add to the chaos

gorge441 · « **Reply #2733 on:** July 25, 2020, 11:21:55 am »

Warm welcome...

NinoScript · « **Reply #2734 on:** July 27, 2020, 05:28:01 am »

Hello! I'm Cristián, I live in Chile, I have a degree in Computer Engineering, but I have not worked with electronics since college.
All my jobs have been in Software Engineering, but now I want to get back to electronics, at least as a hobby.

The most exciting electronics projects I've done in the past have been:

Solving a puzzle with a line follower robot using software PID controller to follow the line smoothly.
Levitating magnet with analog PID controller.
"Tennis for Two" clone (a very very old tennis game for oscilloscopes) using an analog computer (op-amp integrators) to simulate the physics of a bouncing ball.

I don't really remember the math nor the electronics well enough to build these projects again (except for the software parts), so my current goal is to replicate those projects before I move on to new things.

ZoeScott · « **Reply #2735 on:** July 27, 2020, 11:22:06 am »

hey there, I'm also new, just planning to become ee student, wanna observe threads in here and join some discussions, probably))

leet · « **Reply #2736 on:** July 27, 2020, 03:44:18 pm »

Hello, I'm Mustapha, a semi retired Electronics Design Engineer after 25+ years in the business.
Located in Kualulumpur.

gorge441 · « **Reply #2737 on:** July 28, 2020, 06:50:42 pm »

Welcome to the community guys.
Nice to meet you.

yasha02 · « **Reply #2738 on:** July 29, 2020, 05:02:49 am »

Hello, I am Yasha from SF. Here is the link to my site https://scientificthinking.org/

chinoy · « **Reply #2739 on:** August 12, 2020, 08:56:20 pm »

I am Ron Chinoy from Bangalore India.
I build automotive digital Ignitions and AFR meters.

Electronics started out as a hobby. 20 year back.

entroqy · « **Reply #2740 on:** August 19, 2020, 04:10:49 am »

Yo...
I'm G, currently an electrical engineering student at CSUS.
For now just learning it all, no specialty yet.
Nice to meet you.

WildCamper · « **Reply #2741 on:** August 21, 2020, 09:24:57 am »

Hi, i'm Tobey and im from the Lake District, England.

I'm purely a hobbyist (I work with wood as a day job) at electronics who is returning after a large break.
My current project is a mechanical keyboard build (Lily58PRO) so i've had to learn all about SMD work as all my old projects were THT stuff. I went looking on the font of all knowledge (Youtube

) and discovered Dave and his amazing channel. Naturally i had to join this forum after seeing some of his stuff!
Only known about the guy for a few days and im already a fanboy haha

I recently assembled my 1st SMD practise kit with variable quality results so would like to practise more before the main event but otherwise i think i get the gist (big thanks to EEVBLOG for this)

Anyway, thanks for having me!
Tobey

p.s Spent last Friday teaching my 13yr old son how to solder so getting the next gen into it too!

alexnoot · « **Reply #2742 on:** August 25, 2020, 06:27:14 pm »

Hey everyone, Alex here.

I'm an electrician, but I love everything techy, especially if it can be taken apart and played around with. I have a general knowledge about electronics, but I want to learn more and expand my horizon!

crj.guy · « **Reply #2743 on:** September 02, 2020, 08:34:53 am »

Hello to the EEVBlog community. I'm the FNG here, Im located in Arizona and I'm an Aircraft Mechanic with a love of electronics. I live for avionic issues on my planes. Anyway I have a question for anyone who can help me. I have a mini electronics lab at my home all with used equipment but fully functional, I have an Agilent 54622a oscilloscope and a Fluke 8845a DMM. The DMM is what brings me here, I want to replace the display as its brightness is poor and its very burnt in. As i said all my gear is old and very used but functional and accurate. So is there a new display out there I can buy and install? Also do you guy's have any recommendations of other parts I should replace in my Fluke, I figure since i'm going for a deep dive I might as well do as much as I can to give it a new lease on life.

Thanks everyone for your help.

tautech · « **Reply #2744 on:** September 02, 2020, 09:07:22 am »

Quote from: crj.guy on September 02, 2020, 08:34:53 am

Hello to the EEVBlog community. I'm the FNG here, Im located in Arizona and I'm an Aircraft Mechanic with a love of electronics. I live for avionic issues on my planes. Anyway I have a question for anyone who can help me. I have a mini electronics lab at my home all with used equipment but fully functional, I have an Agilent 54622a oscilloscope and a Fluke 8845a DMM. The DMM is what brings me here, I want to replace the display as its brightness is poor and its very burnt in. As i said all my gear is old and very used but functional and accurate. So is there a new display out there I can buy and install? Also do you guy's have any recommendations of other parts I should replace in my Fluke, I figure since i'm going for a deep dive I might as well do as much as I can to give it a new lease on life.

Thanks everyone for your help.

Welcome to the forum.

Use the Search button (not the box) and drop Fluke 8845a into the search field and you'll get plenty of hits of threads on their repair.
Good hunting and luck.

godmodder · « **Reply #2745 on:** September 02, 2020, 02:04:53 pm »

Hi! I'm Jeroen from Belgium and I enjoy learning about electronics. I'm a computer scientist, but hope to broaden my horizons a bit with some hardware knowledge

dongeo · « **Reply #2746 on:** September 05, 2020, 08:49:55 am »

Hello everyone! I'm Donald, from the UK, I've just got started with electronics, and I'm primarily interested in playing around with junk, and making things useful that others have thrown away.

So I've got a load of motors and things that I'm not quite sure what I'm going to do with, but they sure do look cool when they're spinning.

Ahura Mazda · « **Reply #2747 on:** September 23, 2020, 10:51:20 pm »

Hi. electronics student. Saying hi but also testing posting since it seems I'm unable to create new thread.

tautech · « **Reply #2748 on:** September 24, 2020, 12:02:45 am »

Quote from: Ahura Mazda on September 23, 2020, 10:51:20 pm

Hi. electronics student. Saying hi but also testing posting since it seems I'm unable to create new thread.

Welcome.

In each of the forum boards at the top is the New Topic button that you use to start a new thread.
Just be sure to start one in the correct forum section it's relevant to however for those that start new threads the Move Topic feature is available at the foot of the page.

Ahura Mazda · « **Reply #2749 on:** September 24, 2020, 12:35:30 am »

Hi. Thank you for replying.

I've tried that multiple times, but with no luck. By the way, I'm trying to post in "Repair" section.
I'm aware that on some forums, some sections are prohibited from posting on unless one has certain amount of comments. Since you are reading this, as well as my last text, I can post here, but not in "Repair" section.

On help page about posting these is the second line which says: "Note, however, that whether a user can post in a board or topic depends on each board's permissions, and a user's membergroup," which tells me I may indeed not post, yet I see no details.

When I try submitting the post, it just brings me to the same new thread page, but blank this time.

Thank you in advance.


EEVblog® Main Site	EEVblog® on Youtube	EEVblog® on Twitter	EEVblog® on Facebook	EEVblog® on Odysee

Author Topic: New Member, Please introduce yourself (Read 1751934 times)

Share me