Hi,
I just used the KeyGen (ver 2.0b1) to generate a license key.
Before doing so i made sure i had the latest firmware version 00.01.01.00.02
System information before using license key:
Model: DS2072
Serial: DS2A1515xxxxx
Software version: 00.01.01.00.02
Hardware version: 1.0.2.0.0
FPGA version:
SPU 03.01.05
WPU 00.06.05
CCU 12.29.00
MCU 00.05
The license key was generated using Option code: DSAZ (all options, DS2202, License Type: Official)
After restart the options page shows all options install and official with 200M BandWidth option.
I can now set horizontal scale down to 1nsec and bandwidth limit to 20M, 100M and 200M.
Se attached image.
It sems like my scope thinks it is a 300 MHz version unfortunate i don't have anything to test its bandwidth with.
Have any body seen this before ?
PS, Thanks for all your hard work in this forum, great read.
It's normal that my DS2072 when i start it the fan run with low noise, but after 1 min it run at full power and never slow the speed.
It's normal that my DS2072 when i start it the fan run with low noise, but after 1 min it run at full power and never slow the speed.The same thing happens with mine, and I think that with all.
http://riglol.3owl.com/
Perfect!!! Any update in this release?
1. Generates both Windows-Apps correct licenses?
You can use the synapsis version and hit 300mhz too, as the user Niffler explain. But i have sure that the two versions works fine.
2. Are there more possible to activate?
Others users says for me that private key with 14 digits (8EEBD4D04C3771) not work 100% with ds2072a and i not tried uninstall the update yet (not have sure if i going to do this).
My case - with the same software/hardware/mcu version.
Unlock method: studio25 (last post) by windows prompt.
model: 2202 (after update)
serial number: not change
time base: 2ns
bw filter/limit - options: off - 20m - 100m - (not have 200m)
50ohm option: not unlock
Note:
The keygen of studio25 works well (thanks for your work) with all other options unlocked, but i not hit 300mhz.
3. Does anyone know what the difference is to the MCU 02.12?
I think that it's not important because just the software version (not fpga) is updated.
I have try another time for have a DS2302 but nothing...
This time i have install the key from USB connection:
Seed: 1
All Option + 200MHz
After install key i have:
Model: DS2202
time base: 2ns
BW options: off - 20m - 100m (NO 200MHz)
ONLY 1MOhm
we have other ideas for try to have a ds2302??
The people that have a 2302 can explain step by step what they do for have a 2302??
http://riglol.3owl.com/
Perfect!!! Any update in this release?
No, only minimal changes such as a version number, and minor cleanup.
1-) Or send it back and wait for the DS2072A...
2-)The second point I wanted to see how the TV Thriller continues, and perhaps to give some ideas to rekindle the “research fire” to continue.
And it’s true, there was something like 13 and 14 digit of serial numbers with the DS2072 (without the “a”. Or do you get already a new one DS2072A?). I think, that problem was solved in reply#567 ff on page 38. But it was not really clear to me, is it a general problem that been solved or the 13/14 chars long serial/lic1/lic2 or whatever problem…? Very confusing.
3-) The third point was not only to know, what is the change in MCU 02.12. I'm interested in, but also in how the MCU (or even FPGA) can get new Software? With a new Firmware? If the Firmware update 00.01.01.00.02 include the new MCU Version, why nobody get them? My Rigol was shipped with the new Firmware but with MCU 02.12. Where is the difference between the shipped version and the update version of the “same” Firmware (or does the Firmware never change the MCU Version?)? Maybe there are different versions of the same Firmware 00.01.01.00.02? Could I clearly express what I want to say?
Niffler has only luck by get a DS2302. What conditions enabled that is not clear yet...
...or the DOS command line versions...
...but the DOS command line KeyGen...
1-) Or send it back and wait for the DS2072A...
DS2072A = DS2072 Hardware version 2.0
3-) The third point was not only to know, what is the change in MCU 02.12. I'm interested in, but also in how the MCU (or even FPGA) can get new Software? With a new Firmware? If the Firmware update 00.01.01.00.02 include the new MCU Version, why nobody get them? My Rigol was shipped with the new Firmware but with MCU 02.12. Where is the difference between the shipped version and the update version of the “same” Firmware (or does the Firmware never change the MCU Version?)? Maybe there are different versions of the same Firmware 00.01.01.00.02? Could I clearly express what I want to say?
You've need the last firmware for update your device and it's necessary send to rigol a request form for download the new firmware.
I don't know anything about how to do update the firmware to ds2072 and not found the firmware on rigol web site.
...or the DOS command line versions...
...but the DOS command line KeyGen...lol, who compiled it for DOS?
ve7xen seems to have confirmed it?
https://www.eevblog.com/forum/testgear/sniffing-the-rigol's-internal-i2c-bus/msg239833/#msg239833
...or the DOS command line versions...
...but the DOS command line KeyGen...lol, who compiled it for DOS?
Pretty sure that it was compiled for Windows command-line, not DOS. Some people call this "DOS" even though it isn't DOS.