Me too.. i cant donwload..... Please send it to www.yousendit.com it works great
I am Just waiting for it to be able to free my scope ! lol
Me too.. i cant donwload..... Please send it to www.yousendit.com it works great
I am Just waiting for it to be able to free my scope ! lol
Try again now, should be up
if not:
https://www.hightail.com/download/elNKUXV1dzg5bEJ2TzhUQw
You can use either my first firmware patch (https://mega.co.nz/#!FFk10SCY!UuWPXyqZwmca00pa2clOth1ryh1Z-AAgJg2yibfoUw0) with old keygen (riglol.3owl.com) or my newest patch from the post above with the new tirulerbach's keygen (if he decides to publish it).
Decided: https://mega.co.nz/#!qAkUkTZB!XG12bUKhIz4CmQt6DbBnGRMvEe5AvUjEaBxi4R03tw8
Usage : ./riglol-np DSHH 'RIGOL TECHNOLOGIES,DS2072A,DS2D123456789,020084001000........'
yesssssssssssss o got it now !!!!
Please check if i am right..
all i need to do is :
1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive.
2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. All buttons will unlight
3- insert the USB stick into the front panel.
4- Wait for the end of the firmware update
5 - all of the buttons on the front panel will be lit. Turn off the scope. Remove the pendrive
6 - check the new firmware version
7 - Connect to USB cable to PC and open up Ultra Sigma Software
8 - Send the *IDN? command. and get the keys back.
9 - write the keys to the HxD editor and get the final serial and input on the DS2072a
Is that right ? If i understood correctly..
Thanks
yesssssssssssss o got it now !!!!
Please check if i am right..
all i need to do is :
1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive.
2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. All buttons will unlight
3- insert the USB stick into the front panel.
4- Wait for the end of the firmware update
5 - all of the buttons on the front panel will be lit. Turn off the scope. Remove the pendrive
6 - check the new firmware version
7 - Connect to USB cable to PC and open up Ultra Sigma Software
8 - Send the *IDN? command. and get the keys back.
9 - write the keys to the HxD editor and get the final serial and input on the DS2072a
Is that right ? If i understood correctly..
ThanksYup, you got it.
@zombie28, it will be cool if you can share the boot trick (magic buttons tricks), and how to boot from the network (inject ldr / kernel) and other stuff like compiled blackfin IDA plugin.
Hi zombie 28,
after receiving the long string by sending *IDN? of the encryption free made Ds2072A i tried to put this
string into the HxD editor.
But which is the final serial ?
I tried also the rigup keygenerator with the so received string from the DS2072A but i always receive the message "no keys in there".
Did i miss something, or did i send the wrong string to the keygenerator?
at2
On the rigup readme it says ( 2.) Once you got a memory dump of your scope, use the tool "rigup" to create a list of suitable licenses. Example: rigup ds2072a memory_dump.bin "
how do i do this memory dump ?
i did as you wrote:" you need to append your scope's serial number and terminate it with 0 in HxD editor".
But it comess the same answer, that there will be no keys there inside.
What did i wrong? I copied the whole string beginning with "Rigol.." and put it into the HxD editor with appending the SN and 0.
I did only the numbers following the text string " Rigol..." but i think this would be wrong.
RC5KEY1: 88359067012Exxxxxxxxxxxxxxxxxxx
RC5KEY2: 3D44CD4EC48Fxxxxxxxxxxxxxxxxxxx
XXTEAKEY: 95F6CC12864Axxxxxxxxxxxxxxxxxxx
PUBKEY: 006CE7F7xxxxxxxx
PRIVKEY: 008ABBC4xxxxxxxx
SERIAL: DS2D154xxxxxx
$ rigup license your-keyfile.txt NSEH NSER NSEQ
rigup license - Version 0.1
H8LXHB8-QEXAC7W-ZJMN5KH-APD9CVM (NSEH = 0x1C087)
W2LAMX2-DBEFZCT-XSND62C-PG8JJVM (NSER = 0x1C08F)
5CAZKCC-2Z865FH-MQVBXUB-BDV8E8M (NSEQ = 0x1C097)
$ rigup license your-keyfile.txt 0x1C087 0x1C08F 0x1C097 0x1C0A7
rigup license - Version 0.1
H8LXHB8-QEXAC7W-ZJMN5KH-APD9CVM (NSEH = 0x1C087)
W2LAMX2-DBEFZCT-XSND62C-PG8JJVM (NSER = 0x1C08F)
5CAZKCC-2Z865FH-MQVBXUB-BDV8E8M (NSEQ = 0x1C097)
XYJ69WE-SBZABHL-69FYG4N-W6DH2VM (NSFH = 0x1C0A7)
No need for playing with hex editors. You can use keyfiles with rigup, too. They are simple textfiles:Code: [Select]RC5KEY1: 88359067012Exxxxxxxxxxxxxxxxxxx
RC5KEY2: 3D44CD4EC48Fxxxxxxxxxxxxxxxxxxx
XXTEAKEY: 95F6CC12864Axxxxxxxxxxxxxxxxxxx
PUBKEY: 006CE7F7xxxxxxxx
PRIVKEY: 008ABBC4xxxxxxxx
SERIAL: DS2D154xxxxxx
and then:Code: [Select]$ rigup license your-keyfile.txt NSEH NSER NSEQ
rigup license - Version 0.1
H8LXHB8-QEXAC7W-ZJMN5KH-APD9CVM (NSEH = 0x1C087)
W2LAMX2-DBEFZCT-XSND62C-PG8JJVM (NSER = 0x1C08F)
5CAZKCC-2Z865FH-MQVBXUB-BDV8E8M (NSEQ = 0x1C097)
NSEH = All options
NSER = All options + 100 MHz
NSEQ = All options + 200 MHz
License-code for 300 MHz is unknown. Thought it could be NSFH but there are reports that it doesn't work.
If you're brave you could play with rigup and license-codes. You could use hex codes, too:Code: [Select]$ rigup license your-keyfile.txt 0x1C087 0x1C08F 0x1C097 0x1C0A7
rigup license - Version 0.1
H8LXHB8-QEXAC7W-ZJMN5KH-APD9CVM (NSEH = 0x1C087)
W2LAMX2-DBEFZCT-XSND62C-PG8JJVM (NSER = 0x1C08F)
5CAZKCC-2Z865FH-MQVBXUB-BDV8E8M (NSEQ = 0x1C097)
XYJ69WE-SBZABHL-69FYG4N-W6DH2VM (NSFH = 0x1C0A7)
I didn't try zombie28's patched firmware. So maybe somebody posts an example how the output looks like and maybe I expand rigup to play nice with zombie28's code...
Rigol "DS2000(DSP)update_00.02.01.00.03" firmware modified
to return license encryption keys after sending *IDN? SCPI
command. The keys file is returned instead of "the software
version of the instrument" in the following hex format:
02 00
84 00
10 00 <16 bytes of XXTEAKey>
20 00 <2x16 bytes of RC5Key1 and RC5Key2>
08 00 <8 bytes of bit-shuffled ECC public key>
40 00 <64 bytes of ASCII-HEX verification data>
Note: Use this firmware in DS2000A oscilloscopes only!
rigup - License generator for the Rigol DS2000_A series scopes
==============================================================
Use at your own risk!
1.) You need a memory dump from the scope you wish to upgrade. Read the
forums how to achieve this.
Important: ***Read***, not asking the same questions all the time.
There are all necessary information. No pain, no gain! Just learn
for your own benefit!
2.) Once you got a memory dump of your scope, use the tool "rigup" to
create a list of suitable licenses. Example:
rigup ds2072a memory_dump.bin
Replace 'ds2072a' with your model number.
3.) Choose a license from the generated list and enter the 28 characters
in your scope.
4.) Have fun and report success or failure to the forum!
I expand rigup to play nice with zombie28's code...
This means we cannot use the patched firmware as you shown with rigup keyfile, the format of the patched firmware is not in the same keyfile format.. right? so we must use the hexeditor.
yesssssssssssss o got it now !!!!
Please check if i am right..
all i need to do is :
1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive.
2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. All buttons will unlight
3- insert the USB stick into the front panel.
4- Wait for the end of the firmware update
5 - all of the buttons on the front panel will be lit. Turn off the scope. Remove the pendrive
6 - check the new firmware version
7 - Connect to USB cable to PC and open up Ultra Sigma Software
8 - Send the *IDN? command. and get the keys back.
9 - write the keys to the HxD editor and get the final serial and input on the DS2072a
Is that right ? If i understood correctly..
ThanksYup, you got it.
Fail for me, im using windows 8 X64 and Ultra Sigma crashes every time ! and I didn't even get to install the updated firmware. the label on the cd says for DS2000A V01.02
IVE GOT SOFTWARE VERSION 00.02.00 is this a windows 8 x64 thing
Gosh im trying to download latest Ultra Sigma version is downloading so slooow from the rigol server!
rigup.exe license dump.bin DSEZ (or something else?)
NSEH = All options
NSER = All options + 100 MHz
NSEQ = All options + 200 MHz
License-code for 300 MHz is unknown. Thought it could be NSFH but there are reports that it doesn't work.
yesssssssssssss o got it now !!!!
Please check if i am right..
all i need to do is :
1 - Copy the DS2000Update.GEL from the DS2000(DSP)update_00.02.01.00.03 (license keys dump) zip file to a fat 32 pendrive.
2 - Press the power on button on the front panel of the instrument. All of the buttons will light. At the same time press two or three times the Help key on the front panel. All buttons will unlight
3- insert the USB stick into the front panel.
4- Wait for the end of the firmware update
5 - all of the buttons on the front panel will be lit. Turn off the scope. Remove the pendrive
6 - check the new firmware version
7 - Connect to USB cable to PC and open up Ultra Sigma Software
8 - Send the *IDN? command. and get the keys back.
9 - write the keys to the HxD editor and get the final serial and input on the DS2072a
Is that right ? If i understood correctly..
ThanksYup, you got it.
9 - write the keys to the HxD editor and get the final serial and input on the DS2072a