Hi all,
Been playing with WInGPIB and my Rigol DHO914 Oscilloscope to see if it responds to GPIB commands, which it does.
Uncheck "Enable Polling", all rest as default.
Address = TCPIP::192.168.1.205::inst0::INSTR
Sending config/setup commands (SEND ASYNC):
:CHANnel1:DISPlay OFF Turn channel 1 off
:CHANnel1:DISPlay ON Turn channel 1 on
:CHANnel1:SCALe 0.1 Sets the vertical scale of Ch.1 to 0.1 V/div
:CHANnel1:COUPling AC Sets the coupling mode of Ch.1 to AC
Reading back data (QUERY ASYNC):
:MEASure:STATistic:ITEM? AVERages,VPP,CHANnel1 Queries the average value of Ch.1 peak to peak.
:TRIGger:STATus? Query the current trigger status, i.e. AUTO will be returned, albeit due to text var it will be displayed in box…….i’ll fix this at next WinGPIB update.
See the DHO800/DHO900 Programming Guide for much more.
Ian.