Hi, I bought a hantek DSO5062BMV a while back and it looks like there haven't been firmware updates since 2014, I attached my system info window.
I tried installing the latest firmware from the hantek website but i get this error: "No upgrade files detected on USB device". From what I could skim in this thread, the BMV is just a BM with a sd card with video tutorials, the BM model had updates this year. Is there a way to install that firmware on my scope? Did anything really improve since 2012? I am getting increasingly frustrated on how crappy this scope's firmware is
Hi, I bought a hantek DSO5062BMV a while back and it looks like there haven't been firmware updates since 2014, I attached my system info window.
I tried installing the latest firmware from the hantek website but i get this error: "No upgrade files detected on USB device". From what I could skim in this thread, the BMV is just a BM with a sd card with video tutorials, the BM model had updates this year. Is there a way to install that firmware on my scope? Did anything really improve since 2012? I am getting increasingly frustrated on how crappy this scope's firmware is
send email to Amy Cai caiyijun@hantek.com
in principle they can always compile latest firmware for your hardware version
Got the update from Hantek, they said my kernel is no longer supported for updates (so they just gave me the 2014 one), to the question of how I could update my kernel they said "Buy a new one", lol.
Firmware file i got from Hantek
ha ha ha ha-ntek
i have kernel 2.6.30.4 running, with month old firmware 3.30.0 running on my old Tekway (with exact same hw version than yours).
Yes, i do all updates over the network, manually, but it is possible.
for older hardware, there is still hidden direkt link
http://www.hantek.com/Product/DSO5000/DSO5202B_Firmware.zip
where for new hardware, and that link is on Hantek's webpage, is
http://www.hantek.com/Product/DSO5000/DSO5202B_Firmware2.zip
Hi,
I have 2x scopes of the of revision hw1005, hacked to 200MHz bandwidth and updated to firmware 130814.
Both worked fine, until a year ago, when the first one started to hang at step 8/36 of self calibration - error code 0x400.
Now the second Hantek fails self calibration too, only at step 2/36 with error code 0xa00
Any idea, how to fix it ? Is it caused by a HW defect and what components are most likely concerned ?
Hello,
I have an Hantek DSO5102P oscilloscope with stock firmware dso5kp_func_dso5102p20140208 on it, that has not been used for the last 6 months.
Yesterday I tried to turn it on and remains frozen on screen logo. I connected a serial interface to internal port and I got the following result (text file).
How can I solve this problem? I did dump restore before installing the firmware. If I try to rewrite root.bin with DNW freezes, as shown in picture.
I can access the boot menu but I can not get into console. Please help.