Yes, and let it run for a couple of weeks with no luck. But feel free to try yourself, you never know, you might get lucky.
I bought mine from tequipment, but they no longer sale Siglent equipment (no idea why). I believe the current recommended company if you are in America is Saelig. They have a discount thread on this board (Test Equipment) where you can request a discount code. I'm pretty sure its for the same discount amount that tequipment offers to forum members.
Programmed Period | Reading |
1000 s | 1000.266442 |
100 s | 100.0053211 |
10 s | 10.0000525 |
1 s | 1.000000450 |
0.1 s | 0.1000000024 |
0.01 s | 0.0100000002 |
Programmed Period Reading 1000 s 1000.266442 100 s 100.0053211 10 s 10.0000525 1 s 1.000000450 0.1 s 0.1000000024 0.01 s 0.0100000002
Due to lack of time not measured more long periods and this may give enough confirmations for your findings.
Due to the principle of DDS, the output frequency will have some error.For the freq of dds is 300MHz,and the acc is 49 bits,you can exactly calculate the true freq when you set the period as 1000s. For example,when period is 1000s, ideal ftw =0.001*2^49/300M=1876.5,the actual ftw= 1876,so the actual period = 1000.2664417578.
I got mine today and hack it from 40Mhz to 120Mhz in 5 minutes
Very nice generator
I got mine today and hack it from 40Mhz to 120Mhz in 5 minutes
Very nice generator
how you can do that? My signal generator came with version 22R5 , i downgraded it to 17R5( actually i tried to 16R2 but signal generator did not permit) . when i connect to LAN ,i did not see the signal generator's ip , you can look the pictures... main problem is when i click the DHCP ON, ip adress and others became 0.0.0.0. any idea
Maybe you have a problem with your cable, router or home network.
how you can do that? My signal generator came with version 22R5 , i downgraded it to 17R5( actually i tried to 16R2 but signal generator did not permit) . when i connect to LAN ,i did not see the signal generator's ip , you can look the pictures... main problem is when i click the DHCP ON, ip adress and others became 0.0.0.0. any idea
I've also seen 23R5 with my own eyes (most new units with this version but not downloadable from Siglent at this time).
I've also seen 23R5 with my own eyes (most new units with this version but not downloadable from Siglent at this time).Which raises an interesting question: If you are getting a brand new unit (arrives tomorrow), does the unit allow you to save the existing firmware to a file, do the downgrade, apply the hack, and then upgrade back to the as-shipped 23R5 firmware? Or are you stuck with a previous rev if you want to use the hack?
If you go out from 23R5, at this time most new downloadable FW is 23R3.
You can just download the version that is in your device from the internet, no need to download it from the device.
at this time most new downloadable FW is 23R3