I uploaded it again, so it will work for 30 days again.
http://www.filedropper.com/flirexxpn490v22314updatepack
I uploaded the original package flir_exx_pn645_pn646_v3.12.7_update_pack.zip here
durability 30 days
http://www.filedropper.com/flirexxpn645pn646v3127updatepack
and here
http://www.file-upload.net/download-10007428/flir_exx_pn645_pn646_v3.12.7_update_pack.zip.html
You can harmless copy the prodapp.exe and restartapp.bat to your E40 (service mode app, also for Web GUI)
see
https://www.eevblog.com/forum/testgear/flir-e4-thermal-imaging-camera-teardown/msg415480/#msg415480
and here for using rls
https://www.eevblog.com/forum/testgear/flir-e4-thermal-imaging-camera-teardown/msg400024/#msg400024
But a full firmware downgrade is risky.
Good luck!
Does anybody have this archive? Would you share, PLEASE?
Even just prodapp.exe from 3.xx.xx version earlier than 3.18.0 would be VERY VERY helpful.
Guys, PLEASE!, share that archive!!!
I simply can't believe nobody have it somewhere anymore...
Btw, the interesting thing is that there were multiple software releases after 3.12.B7 that followed the same new pattern (3.12B.7 was the last one after which that started.)
Forst release was 3.13 followed by 3.14..3.18, 4.1..4.13. What Flir officially released were X.YZ.0 versions (e.g. my 3.18.0 or current 4.13.0) that ALL have one thing in common -- they ALL had version 0 prodkit that is essentially the same bare minimum with all good stuff removed. All of them, starting with 3.13.0 and all the way to current 4.13.0.
However EACH AND EVERY of those releases also had a NON-ZERO minor number version that was kinda inconsistent within 3.13..3.18 (it was .8, .9, .10, .11, 12 for 3.xx series) but then it became .13 for all releases between 4.1 and 4.6 and switched to .14 for everything up to latest 4.13. That minor version is exactly the same as the minor version of NON-ZERO version prodkits included into particular release that was 4.0.0.X for all 3.xx software versions and became 4.1.0.x starting software version 4.1. For example, the latest publicly released crippled 4.13.0 software has its FULL sibling, version 4.13.14 that includes 4.1.0.14 prodkit instead of that mere version 0 stub in 4.13.0. The infamous 3.18.0 had 3.18.12 sibling with 4.0.0.12 prodkit.
I wonder where all those non-zero minor number versions are and had some of those somehow leaked?
Have you guys ever seen ANY Exx software after 3.12B.7 (which was right after 3.12.7) with NON-ZERO minor (third) number? Any of 4.XX.13 and especially 4.XX.14 versions would be EXTREMELY desirable as they contain latest versions of prodkits. 3.18.12 is the version of ubiquitous 3.18.0 but with all service functions ("Service Menu" and the rest of goodies) included.
I would've paid a substantial amount for 4.13.14 firmware had somebody had one for sale...
The applaunch.dat file in 4.13.0 is SIGNED with some cryptographic key to make any changes to common_dll.dll and appcore_dll.dll impossible so one could not be able to use a hacked one. The signature clearly shows up as new applaunch.sgn file that was not present in earlier versions.
You only need to edit your configuration files. There is not much you can do other than getting full resolution, 4x zoom and a coule of other features from E60. Service menu doesn't work as of now as all X.Y.0 firmwares have the entire web server part for that menu removed and, most important, the prodapp.exe application missing. Web part is easy and some parts of it still work but the most valuable ones like calibration, dead pixel replacement etc. won't as they require prodapp.exe.
I'm still trying to get prodapp.exe from late T6xx/T440 work on E40 but no luck so far -- there are no debugging tools available, WinCE 6.0 development stuff seems to be unobtainium so it is difficult to find out why that prodapp.exe refuses to run. No error messages, no logs of any kind, just won't run.
FILE FlashBFS\system\ui.d\design_ui_e2.xml undefined
...
FILE FlashBFS\system\ui.d\toolbar-config_e2.xml undefined
2) I edit file \FlashBFS\system\appcore.d\config.d\conf.cfg:.caps.config.image.flow entry
.caps.config.image.flow.digitalFilter entry
.caps.config.image.flow.digitalFilter.liveNuc entry
.caps.config.image.flow.digitalFilter.liveNuc.enabled bool true
...
.caps.config.image.services.store.superResolution entry
.caps.config.image.services.store.superResolution.enabled bool true
...
.caps.config.ui.measure.sport entry
.caps.config.ui.measure.sport.enabled bool true
3) I edit file \FlashBFS\system\service\appcore.d\config.d\conf.cfg:.caps.config.image.flow entry
.caps.config.image.flow.digitalFilter entry
.caps.config.image.flow.digitalFilter.liveNuc entry
.caps.config.image.flow.digitalFilter.liveNuc.enabled bool true
...
.caps.config.image.services.store.superResolution entry
.caps.config.image.services.store.superResolution.enabled bool true
4) I edit files *.xml (in attachment). Please remember that sketching mode is not working yet, I try to make it live.FOLLOW UP: forget it - jailbroken easily as per guide posted here. Question is then whether the upgrade brings anything useful?
On the touch screen in the upper right corner is there a ? mark, if there is push it then choose ok to sync the stored data. In a similar problem when all options are enabled on my e30 if at the same time I take a photo right when the camera was doing it's shutter reset thing it is like the processor is over loaded and only the top half of the picture is saved but it warns me that it was not saved. I have learned to slow down with my movements and pull the trigger slowly and solid like and it does not happen.