Well, jumped in on an E4 after following this thread, and what do I receive? An 1.2L/2.11 E4. Not what I expected. Apparently the 2016 E4's are still around...
Now I have some questions:
- Is there any reason to prefer the 2017 non-wifi E4 with 2.0 hardware over the 1.2L hardware?
- Will the hack for 3.9.0 also work on the 1.2L hardware?
I'd hate to miss out on all the extra goodies of the 3.9.0 hack... will this be 'backported' in the future?
I'm not sure if it's reasonable to demand a swap for a 2017 version. The one I received came with a completely flat battery, it needed an hour on the charger before any signs of life of the unit.
MicroBliss - i have the same issue. I just hardreset the cam (unplug the battery for coupple minute), and reconect to usb
Note that after each rebootnig camera, you have to re-run RNDIS mode, then filezilla will have no problem; Or at least I had that
hi
I cant connect my flir
I have already done backup, but on the other day I cant connect by filezilla or ever PC cant see it like usb flashcard.
when I plug in flir in PC: ''configuring terma cam... camera ip adress 192.168.1.2... connecting to 192.168.1.2 Please wait...''
Flir E5 fw 3.9.0Try "recovery procedure" https://www.eevblog.com/forum/thermal-imaging/flir-e4-wifi-resolution-and-menu-hack-thread/msg1336326/#msg1336326 to connect the camera and access files etc.
Or try remove your wired network from the computer before connecting the camera, sometimes rebooting windows before connecting the camera helps.
BEWARE: Bud's package is for the E4 model. Anything else is at your own risk and not supported here, as applying the package to the E4 is at your own risk anyway.
Conected by "Recovery procedure" (user: anonymous, pass: NcFTP@ ). Load bakup. Didnt help.
"\\IRCAM4953\Images
Information = 1231
network folder is not available(close to it in english)..."
Conected by "Recovery procedure" (user: anonymous, pass: NcFTP@ ). Load bakup. Didnt help.
"\\IRCAM4953\Images
Information = 1231
network folder is not available(close to it in english)..."
Why are not all measurement options showing on my camera?
(Or are they not supposed to yet, but part of the advanced hack?)
And if not, would it be possible to adjust the text in the .rsc files to construct my own preset and just (re)name that to for example “preset_threeSpots”, since I won’t be using the “threeSpots” function?
Or are these .rcs files not adjustable this way and need their operation be facilitated in some other part of the software?
Some camera’s, like the WIRIS Gen 2, allow you to change the autoNUC mode in the settings menu, where you can choose between “auto”, “every 1 minute”, “every 5 minutes” and “manual”.
Have you come across such similar function or feature while discovering and unlocking the E4 possibilities?
Quote from: Squawk
Why are not all measurement options showing on my camera?
(Or are they not supposed to yet, but part of the advanced hack?)
There are things other than just the config file that affect that. Advanced package does not add anything there.
My Flir E4 non Wifi model 2.0L firmware 3.9.0.
can I Resolution and Menu Hack Thread ,
Is there a way so I can upgrade Flir......?
Also when turn on Flir I see that "This device has unseported softwear...", but it works.
How can i see that resolution has changed?) Images before had 320x240, and after 320x240.
... will this be 'backported' in the future?
Sorry we are not running a full time business operation here.
Of course, I understand that this is something you have spent a lot of free time on and your effort is very much appreciated.
@ Summer:
Yes, your hack was succesful!
Step 15 is not really a step you have to do. It is more a check if the hack worked so far.
And it did. Both your resolution and the options you now have to select different color pallets, confirms that.
How does the update work from Bud to flir e4 without wifi? or are there any problems?