I'm seeing the same thing. It was fine with 2.39 - not sure if it is 2.41 with a home brew dsox2lan or if it is using the external link. Either way mine still works fine via DHCP even though the IP information on screen is not displayed correctly.
Has anyone seen this before? Is the IP address shown (92.251.81.2) typical in the case of not being able to obtain IP address from DHCP server? Other instruments seem to be working fine...
The LAN interface is configured according to how it was set up in the unanointed setup, but it shows nonsense once anointed...
...Maybe your unit have some static configuration defaulted in.
Just to confirm 100% the odd looking LAN settings only occur when using a infiniivision_ext.lnk with firmware 2.41...
Normaly the scope starts the \Windows\infiniivisionlauncher.exe.
The .lnk file points to \secure\infiniivision\infinnivisionlauncher.exe.
The files aren't the same!
Two years ago in this thread someone reported a problem with patched firmware running from USB stick and the WEB interface, the link below points to the solution:
https://www.eevblog.com/forum/testgear/dsox2000-and-3000-series-licence-have-anyone-tried-to-hack-that-scope/msg484234/#msg484234
Georg
processmgr kill infiniivisionlauncher.exe
copy \secure\InfiniiVisionCore.dll "\program files\infiniivision\InfiniiVisionCore.dll"
"\program files\infiniivision\infiniivisionlauncher.exe" -l all -l BW50 -l SCPIPS -l SGMC -l CABLE
7. Copy this file to "\secure\"50#\windows\cmd.exe /c \Secure\startinfiniivision.cmd
9. done!Normaly the scope starts the \Windows\infiniivisionlauncher.exe.
The .lnk file points to \secure\infiniivision\infinnivisionlauncher.exe.
The files aren't the same!
I have tested the following solution to run the Scope with all licenses and without lan-problems:
...
Has anyone entertained the idea of dumping the flash and adding our own public key.
Has anyone entertained the idea of dumping the flash and adding our own public key.Personally I'm fine with the current solution. I really dislike the possibility of hacking the scopes without clear traces left because that will spoil the second hand market. Just imagine eBay flooded with unlegit scopes...
Well I don't see there being any flood of scopes with bogus licenses added. Not that many people will open their scope, jtag it to read the flash, alter it and then rewrite the flash. It could happen though. To that end I've already seen a DSOX2K on ebay that had all options enabled in firmware and they were open about advertising it - not something I support obviously. In my case my scope will never look 100% legit as the model # is DSOX3014A yet it will always show bandwidth as 350 or 500 MHz. The current hacks are easy enough and simple - but it seems the biggest issue with the DSOX2K/3K series is corrupted flash images or bad flash parts altogether, so anything we can do to help prevent that might be in our own best interest. I know I wouldn't mind having a 100% backup of my flash image.
Well I don't see there being any flood of scopes with bogus licenses added. Not that many people will open their scope, jtag it to read the flash, alter it and then rewrite the flash. It could happen though. To that end I've already seen a DSOX2K on ebay that had all options enabled in firmware and they were open about advertising it - not something I support obviously. In my case my scope will never look 100% legit as the model # is DSOX3014A yet it will always show bandwidth as 350 or 500 MHz. The current hacks are easy enough and simple - but it seems the biggest issue with the DSOX2K/3K series is corrupted flash images or bad flash parts altogether, so anything we can do to help prevent that might be in our own best interest. I know I wouldn't mind having a 100% backup of my flash image.
Trying to buy & flip hacked scopes is a good way to get a nasty-gram from our legal department. Don't do it. We can tell when a scope's been hacked and will fight to stop people from making money off of hacking our scopes.
I personally am all for buying and ...er... upgrading a scope, but don't try to make money off of it. It's been tried before and we intervened.
Do I have to make the Ethernet card first or is there a pre hacked software I can put into a USB key ?
Thanks a lot
Thanks for the answer
Where can I find the 2.35 firmware ? There only 2.41 and and previous version on the keysight website.
http://www.keysight.com/main/software.jspx?cc=FR&lc=fre&nid=-32542.1150180&id=2014479&pageMode=CV