KSGER 2.1 Green board:
DL32: 1733/2466/3323
D4: 1753/2531/3396
D24: 1797/2567/3546~
K: 1705/2367/3065
KSGER 2.1 Blue board:
DL32: 1667/2382/3155
D4: 1693/2423/3241
D24: 1714/2454/3270
K: 1597/2241/2895
KSGER 3.1 Black "OLED 3.1" board:
DL32: 1975/2668/3428
D4: 1985/2683/3442
D24: 1977/2690/3467
K: 1908/2548/3189
KSGER 3.1 Black unmarked board:
D24: 1727/2426/3181
Model: Quicko STM32/CKS T12
Tip: T12-BC2
Calibration > Settings >
ADC Value
Cal. Step 250°C 1050
Cal. Step 350°C 1500
Cal. Step 450°C 1900
Calibration > Start
Temperature ADC Value
Cal250 252°C 1193
Cal350 353°C 1640
Cal450 443°C 2077
welp, ill definitely place swd port on back of my next stations case.
found some bugs.
1) tip detection delay - can be only swithced with press+rotate until 900ms and lowered as usual after. also can finally get 1000ms detection now
2) buttons wake settings affect stand mode too - before i can preselect temp whil handle in stand, now it will awake iron from standby state if set in shake wake settings. and to sleep back i have to lift-land iron.
otherwise looks cool. also got new china jbc compatible stand, now stand mode works as intended
How does the C245 handle and tips compare to the T12 using the KSGR station and David's firmware?
@wickated
Do you have a link to the stand?
Any other Ksger v2.1 users getting these weird oscillations no matter what?
Really, are these extremely slim tps like the ILS useful gor anything? Maybe for soldering a 0402 pad..
@wickated
Do you have a link to the stand?https://www.aliexpress.com/item/4000270557037.html
dont forget that it require rewiring to work with genuine jbc handles.
Please, can you add Tetris next?
Snake better?
Bought it here: https://www.aliexpress.com/item/32844179319.html
It is normal version.
Wickated: I already owned the same version for a couple of years and didn't have any problems so I bought the same.
The fw is there, it's time for some Ksger owner to play with it, check the signals, voltage ripple, noise sources, try replacing the op amp...
Wickated: I already owned the same version for a couple of years and didn't have any problems so I bought the same.gx is at least equipped with 8551 opamp instead of noname fake sheet.