Total stupid....an old Lecroy could store traces to both intenal memory and card....reload them and do math on them
It must be that they WILL not make it so...
I'm not very experienced with modern scopes and generators but could you possibly load the waveform(s) to an awg and then do the math realtime?
theoretical ..yes...but
AWG is sampled with 125MHz and has 16kpts deep....compared to 2 Gsamples and 200Mpts for the waveform in the scope
Total stupid....an old Lecroy could store traces to both intenal memory and card....reload them and do math on them
Stupid are the thoughts to get everything you like to have for only 1400 bucks.
Hello everyone!
Does anyone knowns what are diffrences between hardware versions 02-04 and 02-05 of sds2104x+?
Because of reasons i had to ask supplier to replace oscilloscope and in return i got hw 02-04, and I wonder whenever they released new hw to fix or "optimize".
Hi,
I cant find any SCPI commands for the Bode measurement functionality, its not in the programming manual…?
If somebody can get me an unpacked firmware update or scope application from there's, I can get you a full list of commands, Mine's on the way so I can't do it myself yet.
Michael YYZ wrote:
I connected the scope to my network via LAN and I ❤️ how I could not only monitor the scope but also control it via the web browser on my MacBook Pro, iPad Pro, iPhone, or even via my 21” Wacom tablet - all simultaneously!
I have not been able to do so myself for the iPad. I tried:
- iPad 10.2" (A2270), iPad Pro 10.5" (A1709) and iPad Pro 12.9" (A1584)
- Safari, FireFox and Chrome
- iPadOS 15.1 as well as 14.8.1
Yet, whichever combination I try, it never works:
- I never get to see the full screen of the oscilloscope -it's truncated to various degrees at the right side.
- In full-screen mode, the display gets strongly horizontally distorted (compressed)
- In several cases, there is a misalignment between the positions where you touch with the finger and the items shown menu items
While an iPhone 11 Pro (A2215) does show the full screen, it does have the misalignment issue. (And obviously, that screen is way too small to be usable for this, but not complaining here.)
Attaching some screenshots...
Anyone got experiences here, or perhaps a way to get this to work?
Hi Guys,
Merry Christmas, Everybody!
Slightly of topic here: Can somebody help to identify these pins ?
It's the Logic Analyzer probe, it comes with these high quality connectors.
I would like to make some wires with those on both ends, but do not know what these female headers are.
Thank for any Pointers !
rudi
They are standard 0.025" terminals as used on Tek grabbers and a multitude of headers.
Try turned IC pins.
They are standard 0.025" terminals as used on Tek grabbers and a multitude of headers.
Try turned IC pins.
They are NOT the same as turned IC sockets. These are larger.
They are standard 0.025" terminals as used on Tek grabbers and a multitude of headers.
Try turned IC pins.
They are NOT the same as turned IC sockets. These are larger.
Indeed. From the ones I have seen from Tektronix, these type of sockets have spring loaded tongues inside. A turned IC pin won't spring back but these logic analyser probe sockets are designed for many mating cycles and will also make good contact on thin wires as well. Unfortunately I never managed to find out where to buy them.
https://int.siglent.com/info/detail-52.html
Why are they always redirecting away the first time I open one of these int.siglent.com links?
This redirect to siglenteu.com is in the html:
<meta content="telephone=no" name="format-detection" /> <script>window.location.href='[url]https://www.siglenteu.com/'[/url]</script><link href="/css/global.css" rel="stylesheet" type="text/css" />
If I open the link one more time, I get to see the content because they have removed the redirect:
<meta content="telephone=no" name="format-detection" /> <link href="/css/global.css" rel="stylesheet" type="text/css" />
Dunno, works fine here with W10 and Chrome.
I see the same behavior in Firefox and Chromium on Linux. Could be region specific? Sounds a bit like they forgot a redirect in there when visiting from Europe.
Same here, Win10/Edge.
First clicking leads to siglenteu, second to the "real" one.
siglenteu.com IS the REAL one in EU..
siglent.eu is NOT
Thank you, I always keep getting it mixed up....
Argh, the logic probes are getting more and more interesting, as I want to do something with old logic circuits.
Welectron got more than enough on stock, while others don´t.
So I could get them inbetween few days.....but the price is killing me:
https://www.welectron.com/Siglent-SPL2016-Logik-TastkopfWish they would make a promo offer for good old siglent customers like me...
Argh, the logic probes are getting more and more interesting, as I want to do something with old logic circuits.
Welectron got more than enough on stock, while others don´t.
So I could get them inbetween few days.....but the price is killing me:
https://www.welectron.com/Siglent-SPL2016-Logik-Tastkopf
Wish they would make a promo offer for good old siglent customers like me...
JOOI, does the price on that SPL2016 happen to be exactly that of an SDS1202X-E?
The disparity between what, in the UK, 360 quid can buy you from an official Siglent agent, is simply laughable.
That offer Tautech keeps harping on about is no use to current owners unless they liked their SDS2K+ so much they just had to buy a second one. Your best option seems to be in this DIY Logic Analyzer Probe and Pods for Siglent (and LeCroy) scopes topic thread here:
https://www.eevblog.com/forum/testgear/diy-logic-analyzer-probe-and-pods-for-siglent-scopes/msg3495284/#msg3495284 If you haven't already read this topic, it's well worth perusing imo.