And for HD owners ?
The early bird is always the dumbest one...
Or mostly.
The early bird is always the dumbest one...
Or mostly.
The offer link redirects me to siglenteu.com and when I choose "SDS2000X Plus Series" from products, I get a SDS2000 Plus page and there is a mention of this offer, but it says that "All offers are valid until December 31st, 2021".
So it seems this offer is not available in EU
The offer link redirects me to siglenteu.com and when I choose "SDS2000X Plus Series" from products, I get a SDS2000 Plus page and there is a mention of this offer, but it says that "All offers are valid until December 31st, 2021".
So it seems this offer is not available in EU
New firmware for SDS2000X Plus models.
https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS2000X%20Plus_V1.5.2R1_EN-2.zip
Version V1.5.2R1
21MB
Release notes
Measurement enhancement - Added setup/hold time: tsu@R, tsu@F, th@R, th@F
Optimized UI
Added SCPI commands for Measure Cursors and clearing measure items in Simple mode
Supported LXI (only with the Uboot-OS Version 5.4)
Supported time zone setting
Fixed several bugs:
Webserver doesn’t show instrument UI if the scope reboot with a wireless mouse connected
Incorrect “Recall”icon in the File Manager
Scope freezes with AWG enabled and measure cursor on rise time
IP setting of AWG in Bode Plot not remembered after reboot
Network storage only works for SMB1.0
MEAS:SIMPle:ITEM\sOVSN,ON does not work as expected
Roll time incorrect at 1ks/div and 20kpts
Raw data not consistent in x and sinx/x interpolation modes
Math: Dx parameter of Derivation cannot be increased by universal control
Incorrect FFT sample rate
This seems to be the previous update originally made available on august 24 2022. May be they re-uploaded with newer date.
This seems to be the previous update originally made available on august 24 2022. May be they re-uploaded with newer date.Just checked this and file size matches however the filename is slightly different so it seems this maybe a fix for the Timezone bug that's mentioned here:
https://www.eevblog.com/forum/testgear/siglent-sds2000x-plus-coming/msg4398076/#msg4398076
Please, someone check this ?
Siglent SDS2000X Plus V1.5.2R1 Firmware Update
4. Supported LXI (only with the new produced units)Regarding this LXI support. What sort of functionality do you get? And why only for new units?
The firmware is identical. The only difference is in the pdf instructions.
The firmware is identical. The only difference is in the pdf instructions.Is the Time zone bug that Performa01 reported not fixed ?
The firmware is identical. The only difference is in the pdf instructions.Is the Time zone bug that Performa01 reported not fixed ?Can't be. The ADS-files in the original zip and in the new zip are binary identical.
If it was fixed, I would expect it to have a new version, as well as an entry in the release notes.
OK so you didn't check, maybe someone else can.
The firmware is identical. The only difference is in the pdf instructions.Is the Time zone bug that Performa01 reported not fixed ?Can't be. The ADS-files in the original zip and in the new zip are binary identical.
If it was fixed, I would expect it to have a new version, as well as an entry in the release notes.OK so you didn't check, maybe someone else can.
Hi. First post from a newbie! Don't know if this is right place to post this but anyway...
The signal with no zone settings: look dirty
...
You want just simple stable triggering right ?
Hit Stop and eyeball the longest packet duration and in the Trigger menu set Holdoff to a slightly longer duration.