-
-
Hi straycat,
Could I please have the latest version of the firmware for my DS1000E scope.
It's already hacked as a DS1152E and is currently on firmware 4.01 (HW version 58).
Here's my email:
psyko_chewbacca@hotmail.com
Thanks!
-
#1726 Reply
Posted by
essence25
on 02 Oct, 2015 07:52
-
I would also like the new firmware please.
Thank you! 1052E 00.03.01
-
-
Hi,
First of all, a big thanks to everyone involved in developing this "mod". Highly appreciated!
I have a DS1052E and just want to clarify that this one a moddable. I've not made any upgrade/update of it since purchase.
Model: DS1052E
Serial: DS1ET16XXXXXXX
Software_ 00.04.01.00.02
DSP: 00.01
FPGA: 03.07
HardV: 58
FFT, USB, P/F and RS232 installed
Will I be able to mod it i.a.w the dummy guide?
-
#1728 Reply
Posted by
raspi
on 08 Oct, 2015 17:11
-
please send me the mod too
thank you
dennis.fukas@googlemail.com
-
-
Went back some pages and downloaded SW to a stick. After upgrade I've got 2ns timebase.
Superb. Well done guys
-
#1730 Reply
Posted by
vlbk
on 16 Oct, 2015 13:56
-
Hi! A'm have DS1052E with firmware version 00.04.01 SP7.
Can you sent me a new version of the hacked firmware?
My e-mail: vlbk@inbox.lv
More thanks and best regards
Vladimir
-
#1731 Reply
Posted by
ValGlu
on 16 Oct, 2015 17:39
-
Hello, straycat.
Can you sent me the ORIGINAL version of the new firmware (00.04.02)?
Many thanks!
My e-mail: valg@ukr.net
-
#1732 Reply
Posted by
lektronick
on 17 Oct, 2015 04:02
-
-
#1733 Reply
Posted by
straycat
on 18 Oct, 2015 12:44
-
hI GUYS, .Thank you guys for your messages, the one,s that have asked about the new firmware 00.04.02.01.00 can it be updated to 100mhz, the answer is yes already done..
-
#1734 Reply
Posted by
freimann
on 19 Oct, 2015 16:17
-
Hi Straycat,
would you please send me the new firmware ...
Thank you - peter@freimann.cz - DS1052E @ 02.06
-
#1735 Reply
Posted by
ceaushu
on 21 Oct, 2015 20:35
-
Hi Straycat, could you please send me the file for DS 1052E (current version 00.04.02.01.00), modified for 100 MHz ?
Thank you!
The e-mail address is ceaushu@yahoo.com
-
#1736 Reply
Posted by
w33m4n_
on 21 Oct, 2015 21:18
-
Hi everybody,
i have got my new ds1052e
the firmeware is 00.04.02.01.00 HW=58
i want to modify it to do the 100mhz. but i dont understand the guide.
can somebody tell me how it works with my firmware version?
thanks
-
#1737 Reply
Posted by
straycat
on 22 Oct, 2015 12:35
-
Hi w33m4n. have emailed you the new update. To install it, put the file on a usb stick, plug it in your scope, it should say new or same update found"do you want to install" just install it, re-start your scope and your done. Hope this helps.
-
#1738 Reply
Posted by
straycat
on 22 Oct, 2015 12:44
-
Hi,
First of all, a big thanks to everyone involved in developing this "mod". Highly appreciated!
I have a DS1052E and just want to clarify that this one a moddable. I've not made any upgrade/update of it since purchase.
Model: DS1052E
Serial: DS1ET16XXXXXXX
Software_ 00.04.01.00.02
DSP: 00.01
FPGA: 03.07
HardV: 58
FFT, USB, P/F and RS232 installed
Will I be able to mod it i.a.w the dummy guide?
STRAYCAT.
Doing the update the old way i would say no on that,although i have done many without any issues,. The problem you will have is that the firmware you have installed you cant downgrade unless you know what your doing i.e modding the firmware. My advice is to just update it with the new firmware on a usb.. Hope this helps.
-
#1739 Reply
Posted by
Input220v
on 22 Oct, 2015 15:33
-
Hi StrayCat,
What do you think about this version?
DS1052E
Serial No. DS1ET xxxxxxxx
Software Version 00.04.01.07.00
HardVersion = 58
I can send dump flash s29gl064 and 24lc04 eeprom
maybe you have solution to downgrade the firmware to get 100MHz
-
#1740 Reply
Posted by
ValGlu
on 24 Oct, 2015 10:05
-
Hello, lektronick.
Thanks for the link.
-
#1741 Reply
Posted by
straycat
on 24 Oct, 2015 16:22
-
Just would like to say,glad all you guys who have emailed me are happy with the modded 00.04.02.01.00 update, Glad i could help.
-
#1742 Reply
Posted by
fauweh
on 26 Oct, 2015 21:51
-
Hi Straycat,
could you please send me the modded firmware for 100 MHz?
My Scope is a DS1052E @ original 00.04.02.01.00
Thank you in advance!
My mailadress: fau-weh@gmx.de
-
#1743 Reply
Posted by
N7PXY
on 31 Oct, 2015 19:09
-
straycat,
I would also like a copy of the software to modify a DS1052e from 50mhz to 100mhz.
Thanks,
PJ
hickspj467 (at) Comcast.net
-
#1744 Reply
Posted by
Borat
on 02 Nov, 2015 03:23
-
I realise this is my first post so Hi guys and girls.
I wanted to know if this "hack" is still working ok? I was going to buy a DS1052E from rigol.co.uk but wanted to be sure this still works ok on the latest firmware. Last thing I want is for it to be patched in the latest version (04.01 I think).
If it is, could I get a copy of the modded firmware please?
-
#1745 Reply
Posted by
straycat
on 04 Nov, 2015 16:55
-
Borat,. Yes it can modded to 100mhz. Hope this helps.
-
#1746 Reply
Posted by
Borat
on 04 Nov, 2015 17:22
-
Thanks for getting back straycat! Shifted my attention to the 2072A "thanks" to an eevblog youtube video - damn you eevblog! *shakes fist*
-
#1747 Reply
Posted by
shiftline
on 13 Nov, 2015 03:25
-
Hey Guys, I'm about to order my first real o-scope (well i have a cheap USB one..)
I was looking at the Rigol DS1102Eg until i found this wonderful upgrade for the Rigol DS1052E. Mind as well save $80 if the hardware is the same..Acording to the video it looks like I will have to downgrade the firmware to mod it.. I cant seem to find a link so like the previous post could someone please hook me up with a copy!
Thanks guys!
I'm to get my new toy
-
#1748 Reply
Posted by
Arses
on 13 Nov, 2015 08:00
-
Hi, all!
Please send me last firmware) email: sendbox0(at)ukr.net
THX
-
#1749 Reply
Posted by
shiftline
on 13 Nov, 2015 15:19
-
me too please sicon99 (at) hotmail (dotcom)