It is the 'G' in the code, 3rd letter, that is important.
Regards,
Jay_Diddy_B
3rd letter in the chart I've been using is insert size tolerance.
Of course that's important for a programmable mill or lathe but for a manual hobbyist lathe ?
http://www.mhuk-carbide.co.uk/technical_information/tec_turning_tools/tec_turning_insert/tec_turning_guide/tec_turning_identificationOTOH G is significant for me as the 4th letter in the code is a principle requirement as it signifies double sided inserts and with T as the first signifying triangular inserts means double sided and 3 corners gives me 6 cutting edges for each insert.
You just don't know how satisfying that is to someone with Scottish heritage !
Kaiweets probe leads because the Fluke ones didn't like (I -gt 10A) it seems.
Although during my School times I had 2 calculators (A Graphics that I can only use in Maths and a Scientific for Physics and Chemistry - Casio CFX-9850G "Black Model" and a Casio FX-82MS) I got converted to Texas Instruments when I got the TI-89 Titanium back in 2005.
No solar implementation on this one. For some reason I dislike how solar calculators design is implemented with the rectangle on top for the solar panel. If it was like the Casio "Tough Solar" or Seiko Solar style, were the panels are seamless integrated in the dial without being out of place it would be a different thing. Also chrome buttons... BIG HUGE NO! They are know for with time to break away and create a hazard since depending of the way it breaks out it can be a knife.
Is the current Casio FX-991EX/ES or the Texas Instruments TI-36X PRO a better deal compared with this one? Probably, but I still like this one way more.
New autumn project. Uncal error on powerup. Once I get that fixed I will see if I can get the OSHW Option 1950 built to give it AC and current measurement capability.
A 240GB SSD for appx 21€...Unbeliveable...
Laugh of the day:
"Warranty void if seal removed/broken"......
so I phoned through the order - above not withstanding
and await the TA041 differential probe
Bought a(nother) load of Joycon analogue joysticks for my sons Nintendo switch controllers because they last as long as a set of Poundshop batteries. Who at Nintendo thought for even a moment, that this was a robust design?
McBryce.
Bought a(nother) load of Joycon analogue joysticks for my sons Nintendo switch controllers because they last as long as a set of Poundshop batteries. Who at Nintendo thought for even a moment, that this was a robust design?
McBryce.
That problem was solved 20 years ago by no other than Sega -
https://youtu.be/klhFkIsV-lEI think that the N64 also had the joystick as a Halo effect (don't quote me on that, not 100% sure).
And the new Steam Deck have an OEM replacement available for the same technology (although it comes originally with normal analogue sticks) -
https://youtu.be/Ljg_UOKPeMY
That problem was solved 20 years ago by no other than Sega - https://youtu.be/klhFkIsV-lE
I think that the N64 also had the joystick as a Halo effect (don't quote me on that, not 100% sure).
And the new Steam Deck have an OEM replacement available for the same technology (although it comes originally with normal analogue sticks) - https://youtu.be/Ljg_UOKPeMY
Surprised more of the high end controllers wouldn't come with this, you'd think it would be a good selling feature: "guaranteed never to drift".
From what I've seen on repair channels, they all come with the same "cheap" Alps pot units. Which I get on the low end stuff, as the clones are <50c each. No idea what Sony/MS pays for alps though.
Two boat anchors:
- A Goldstar GP-103 bench power supply
- And this thing:
But both were pretty cheap, soo... heh.
That problem was solved 20 years ago by no other than Sega - https://youtu.be/klhFkIsV-lE
I think that the N64 also had the joystick as a Halo effect (don't quote me on that, not 100% sure).
And the new Steam Deck have an OEM replacement available for the same technology (although it comes originally with normal analogue sticks) - https://youtu.be/Ljg_UOKPeMY
Surprised more of the high end controllers wouldn't come with this, you'd think it would be a good selling feature: "guaranteed never to drift".
From what I've seen on repair channels, they all come with the same "cheap" Alps pot units. Which I get on the low end stuff, as the clones are <50c each. No idea what Sony/MS pays for alps though.
It would be but we are a minority. Most consumers just throw away the controller and buy a new one, they don't go to source the part and repair it.
And companies know that. Extra profit by buying a new controller over a part that costs cents.
Got a very good deal (around 25% of new) on a Mitutoyo Uni Micrometer from the UK. Was calibrated a few years ago and with a quick wipe of the Anvils seems like it still is. No real need for it specifically right now but it was so close to the price of a standard Mitutoyo Micrometer it was easy to convince myself
One planned purchase: Two Knipex ESD Tweezers (got fed up using cheap tweezers and dentist throw-aways).
One impulse purchase: Component drawers in "Project size" (they are on special offer at LIDL for just €8,99!)
McBryce.
Being inclined to mess about with old TV's, of the CRT valve powered variety, I'm always surfing ebay for parts, test gear etc, here in the UK.
So, I wanted a particular Philips TV pattern generator and had an auto search set up on ebay. One came up this week, and it was local, like about 5 miles away, that is a VERY rare event for any item on ebay, let alone a niche piece of test gear!
Obviously I bid for it, very strongly, and won it at £25! Result right there!
Being local I arranged to collect it and when I walked into the guys garage where he's kept it I saw the holy grail! Not the pattern generator, that was good enough, but 6 big plastic storage boxes full to the brim with NOS valves!! All boxed, unused NOS!! there must be about 750 at least!! Then another box full of vintage NOS pots, presets, components, pickup cartridges, styli, etc, etc. I was literally beside myself with excitement!
We had a chat and it transpires that his mates Dad had been a TV engineer and had unfortunately died, this was all his working stock. There was also another couple of test gear items which I snaffled, and there is apparently tons more stuff!
We did a deal on the valves and I bought it as a job lot, it's going to be a huge task to catalogue them all!
I'm getting first refusal on all the other stuff, can't wait to see whats there!
He's quite pleased because it means he gets to clear a load of stuff to one buyer without having to list it all, pack it, ship it etc.
I cannot believe my luck, it's just a crazy find, and local! Going back to the Philips pattern gen, that is in fantastic condition, never been damp, no corrosion and cosmetically excellent. Amazing for a 40-50 year old piece of test gear!
Still buzzing, please excuse the excited outburst!
That is a pretty good find! Good luck with your sorting.
I myself can be considered pretty lucky as well (perhaps not as much as you), but I was able to get a huge assortment of vintage IBM peripherals and SW and also a few interesting components - all for free.
Nice one! I know how that must feel to a computer geek!! The really good thing is all this stuff gets saved from being dumped or recycled, to be lost forever!
That is a pretty good find! Good luck with your sorting.
I myself can be considered pretty lucky as well (perhaps not as much as you), but I was able to get a huge assortment of vintage IBM peripherals and SW and also a few interesting components - all for free.
You didn't got something as a IBM Selectric? That is my grail.
That is something I would like too. Not so long ago they were all over the place for nothing, but now they are hard to find, especially the early types.
just downloaded, onto my kindle, David Herres
Oscilloscopes: A Manual for Students, Engineers, and Scientists 1st ed. 2020
Haven't got to the pictures yet - it reads ok, so far
That is a pretty good find! Good luck with your sorting.
I myself can be considered pretty lucky as well (perhaps not as much as you), but I was able to get a huge assortment of vintage IBM peripherals and SW and also a few interesting components - all for free.
You didn't got something as a IBM Selectric? That is my grail.
No, I wouldn't be able to hold onto such large item at this moment. Although there are several that pop in the local used websites in different functional conditions.
As a kid I visited my dad's job a few times and marveled at the IBM Selectrics of the time. Quite the machines.
1960ies Siemens Decade Resistor Box. 1R-1,22M from epay. Sadly as it turns out not in decent shape as the seller described it.
Basically all but two decades where completely out of spec. Only the 1000R and the 100000R range were fine, all other resistors had drifted over 10% out of spec. On quite a few resistors the endcaps were loose so the resistance drifted with vibration, too.
A total mess, I paid way too much for it. Have to take that issue up with the seller.
But it looks so nice, I couldn't not spend 30,- EUR in new 1% resistors to make it all work nice again. Mind you original resistors were all 0,5% I'm not that crazy.
Garbage picked a Fluke 189 which "failed" calibration. We'll see. Bought a 440mA fuse on eBay and some 10 turn pots to help with calibration.