I don't think it's safe to assume anything about software from a company that lets stuff like this get through:
I don't think it's safe to assume anything about software from a company that lets stuff like this get through:
I don't think it's safe to assume anything about software from a company that lets stuff like this get through:i can understand your nitpicking comment if you are not the one who develop softwares.... do you believe its intentional?
Nitpicking?
Nitpicking?i saw your pluses report scattered everywhere. post it in bug/wishlist thread, report to rigol and hope for the best. in the mean time dont use it or if its really important how many pluses on the screen, then you need to eyeball it. imho the bug has not enough merit to decide to buy or not i my self havent a need for it yet. the OP may search the forum for complete bug list, then he can make the decision whether is that important or not. the pluses bug is hillarious though..
If your car could only make left turns... would you consider that important or not? It might not be to some people, but if you sold it to someone without telling them... they might not be too happy. Meanwhile... people complain about the _fan noise_ in the Rigol, or the fact that they need to be careful pushing the knob-buttons, but don't seem to care about things like the pulse miscount or the measurements stopping completely !!!
If your car could only make left turns... would you consider that important or not?
when you buy an DSO, do you expect it to have pulses mesurement? go buy gwInstek and hope you have those statistics, pulses etc.. 17 math functions...
If your car could only make left turns... would you consider that important or not?
Total long shot here. I think it is safe to assume the DS1054Z has some sort of recovery mode in the bootloader to recover from a failed flash.I don't think it's safe to assume anything about software from a company that lets stuff like this get through:
Total long shot here. I think it is safe to assume the DS1054Z has some sort of recovery mode in the bootloader to recover from a failed flash.I don't think it's safe to assume anything about software from a company that lets stuff like this get through:
Apparently you can load firmware during boot by pressing the 'help' key:
https://www.eevblog.com/forum/testgear/rigol-ds1000z-series-firmware-downgrade-*is*-possible-and-here-is-how/
These are functions that I've never used after over a year of ownership. I will probably never use them so I simply don't care.
Hey... I don't care if there are typos in the Chinese menus... because I don't speak read or write Chinese. How boring is that?
This new 50MHz version of the 4-channel DS1000Z series scopes is being discussed in several threads, particularly this one. However, the price/performance is so outstanding that it surely deserves its own.
A 4 channel, 12 Mpts memory, 30 000 waveforms/second, intensity graded scope of this quality for around 399 USD/299 EUR/235 GBP (plus tax) is nothing short of astounding, even before the hacking possibilities are considered.
Dave has announced that he is getting one, so hopefully we can look forward to a review in the not too distant future, and - unless he finds any unexpected gotchas - a new default recommendation for entry level scopes.
Due to the ever-growing length of this thread, I have added an FAQ section about the scope:
(Additions/corrections welcome - send me a PM)
The scope (and some other Rigol models) originally had some issues relating to excessive jitter which were corrected by a firmware update to SW version 00.04.02.SP4 in December 2014. Subsequently shipped scopes are likely to have been fixed already. A link to the update was posted on the forum by Rigol and can be found here. This currently links to a newer SW version (04.03) which also fixes some other minor bugs.
The oscilloscope does not have a real time clock, and therefore cannot add the current time and date to saved screenshots and other data. A number of trial options are initially enabled which will expire after 35 hours runtime (not 35 hours since first use).
A 'hack' is available to enable 100MHz bandwidth and all of the trial features which after expiring are normally only available at additional cost. Users considering this should be aware that it is not approved by Rigol and may void the warranty. A website featuring the code generator to enable the features can be found at http://gotroot.ca/rigol/riglol/. Do not use the DSFR code suggested on the website. Codes for 500uV vertical resolution are intended for oscilloscopes such as the DS2000A series which have the necessary hardware for this feature. The code DSER enables all features except 500uV, which is not supported on the DS1000Z series and will cause erroneous results at this setting.
The US vendor TEquipment offers a discount on this oscilloscope and other products to EEVBlog members. This is available if you mention the offer when ordering. You can also use a discount code, but TEquipment have requested that it not be reproduced on the forum. There is a forum topic where the code can be requested from other members here.
Some of the RP2200 probes supplied with the scope have been found to have intermittent contacts when switched to the 1X setting. A fix for this issue is described here.
Dave has a number of blogs featuring this scope and its siblings:
A first look: EEVBlog 522
Teardown: EEVBlog 674
Reverse engineering: EEVBlog 675
Jitter problems: EEVBlog 683
Jitter fix: EEVBlog 699
Summary review: EEVBlog 703
Features review: EEVBlog 704
Probe performance: EEVBlog 707
(There is apparently also a performance testing review which has not yet been released.)
Hi all,
I am trying to find the link to FAQ for DS1054Z. Any plans for it?
jtbili
No need to use putty. Just enter the following command in the console:
telnet <ip-address> 5555
Checked on Linux.
Right, it works perfect in Linux. But in my company laptop I have win only, no chance for changing or adding new system.
I had to find quick, easy and simple solution. Telnet in Win7, 8 had problems with connection, puTTYtel - never.
Is it possible do external trigger with this 4 ch rigol?