#
# Prodconf - Measurement active + 4 mbox's and 4 spots + 1 isotherm
# + radiometric store, compatible radiometric format
#
.caps entry
.caps.config entry
.caps.config.name text "i7_2012"
.caps.config.revision text "1.0"
.caps.config.image entry
.caps.config.image.sysimg entry
.caps.config.image.sysimg.measureFuncs entry
.caps.config.image.sysimg.measureFuncs.enabled bool true
.caps.config.image.sysimg.measureFuncs.diff entry
.caps.config.image.sysimg.measureFuncs.diff.enabled bool true
.caps.config.image.sysimg.measureFuncs.diff.maxCount int32 1
.caps.config.image.sysimg.measureFuncs.diff.calcMask int32 65526
.caps.config.image.sysimg.measureFuncs.isotherm entry
.caps.config.image.sysimg.measureFuncs.isotherm.enabled bool true
.caps.config.image.sysimg.measureFuncs.isotherm.calcMask int32 20
.caps.config.image.sysimg.measureFuncs.isotherm.dual bool false
.caps.config.image.sysimg.measureFuncs.isotherm.fixScale bool false
.caps.config.image.sysimg.measureFuncs.isotherm.interval bool true
.caps.config.image.sysimg.measureFuncs.isotherm.invInterval bool false
.caps.config.image.sysimg.measureFuncs.isotherm.maxCount int32 1
.caps.config.image.sysimg.measureFuncs.mbox entry
.caps.config.image.sysimg.measureFuncs.mbox.enabled bool true
.caps.config.image.sysimg.measureFuncs.mbox.calcMask int32 1924
.caps.config.image.sysimg.measureFuncs.mbox.maxCount int32 4
.caps.config.image.sysimg.measureFuncs.reftemp entry
.caps.config.image.sysimg.measureFuncs.reftemp.enabled bool true
.caps.config.image.sysimg.measureFuncs.reftemp.calcMask int32 1924
.caps.config.image.sysimg.measureFuncs.reftemp.maxCount int32 1
.caps.config.image.sysimg.measureFuncs.spot entry
.caps.config.image.sysimg.measureFuncs.spot.enabled bool true
.caps.config.image.sysimg.measureFuncs.spot.calcMask int32 514
.caps.config.image.sysimg.measureFuncs.spot.maxCount int32 4
.caps.config.image.services entry
.caps.config.image.services.store entry
.caps.config.image.services.store.enabled bool true
.caps.config.image.services.store.radiometric entry
.caps.config.image.services.store.radiometric.enabled bool true
.caps.config.image.services.store.incompatible entry
.caps.config.image.services.store.incompatible.enabled bool false
.caps.config.image.services.store.incompatible.level int32 0
.caps.config.image.settings entry
.caps.config.image.settings.enabled bool true
.caps.config.image.settings.resIR int32 144
.caps.config.image.settings.fpgaResolution entry
.caps.config.image.settings.fpgaResolution.enabled bool true
.caps.config.image.settings.fpgaResolution.resIR int32 144
.caps.config.hw entry
.caps.config.hw.sdcard entry
.caps.config.hw.sdcard.enabled bool true
# ID 601059583
# CRC01 691a932f
#
# ZCam Radiometric - Measurement active + 1 spot + no isotherm + no mbox
# + radiometric store, compatible radiometric format
#
.caps entry
.caps.config entry
.caps.config.name text "i3_2012"
.caps.config.revision text "1.0"
.caps.config.image entry
.caps.config.image.sysimg entry
.caps.config.image.sysimg.measureFuncs entry
.caps.config.image.sysimg.measureFuncs.enabled bool true
.caps.config.image.sysimg.measureFuncs.mbox entry
.caps.config.image.sysimg.measureFuncs.mbox.enabled bool false
.caps.config.image.sysimg.measureFuncs.mbox.maxCount int32 0
.caps.config.image.sysimg.measureFuncs.spot entry
.caps.config.image.sysimg.measureFuncs.spot.enabled bool true
.caps.config.image.sysimg.measureFuncs.spot.maxCount int32 1
.caps.config.image.sysimg.measureFuncs.isotherm entry
.caps.config.image.sysimg.measureFuncs.isotherm.enabled bool false
.caps.config.image.sysimg.measureFuncs.isotherm.maxCount int32 0
.caps.config.image.services entry
.caps.config.image.services.store entry
.caps.config.image.services.store.enabled bool true
.caps.config.image.services.store.radiometric entry
.caps.config.image.services.store.radiometric.enabled bool true
.caps.config.image.services.store.incompatible entry
.caps.config.image.services.store.incompatible.enabled bool false
.caps.config.image.services.store.incompatible.level int32 0
.caps.config.image.settings entry
.caps.config.image.settings.enabled bool true
.caps.config.image.settings.resIR int32 60
.caps.config.image.settings.fpgaResolution entry
.caps.config.image.settings.fpgaResolution.enabled bool true
.caps.config.image.settings.fpgaResolution.resIR int32 144
.caps.config.hw entry
.caps.config.hw.sdcard entry
.caps.config.hw.sdcard.enabled bool true
# ID 601059583
# CRC01 7b6a26f7
Hi to all...I'm new here.
Is it possible to hack E5 same as E4?
I'm asking because I can get E5 cheaper then E4.
Hi everyone! A while back I posted my story of buying a used e4 already with 2.3 downgraded, res modded, and ROC, and eventually upgraded to 2.11 with the 2lps method.
The res hack works great on my e4, but the menu hack does not. I only have a tiny subset of the enhanced menu options. I'd like to explore trying to get it working once and for all.
I know my SUID, have a complete 32-bit VM with Flir Tools, FileZilla, and all the backups I've ever made. Is there a good jumping off point to try and figure out what is the deal with my camera? I've decrypted/encrypted my conf, ui_control, facet.rcc etc. files more times than I can remember and everything "looks" good. If anything I'd like to at least removed the FLIR logo from the display as it's covering valuable pixels!
Thanks in advance!
1. Can I force calibration, pressing some button (like on Exx series)?
cmd /C \StorageCard\boot1.cmd
set /p trig1=<\StorageCard\boot\trigger1.txt
...
:label1
delay 5
rls ui.userSettings.PaletteReversed >\StorageCard\boot\trigger.txt
set /p trig=<\StorageCard\boot\trigger.txt
if "%trig%"=="%trig1%" goto label2
goto label1
:label 2
# your code
# a sample for triggering the nuc
rset .image.services.nuc.commit true
...
PaletteReversed true
This works fine on Exx.Btw. are there any news in regards to unlocking the full resolution of the i series?
F4 1.22.0 after update to 2.3.0 only displays FLIR after power-up. Flirinstalnet program doesn't detect the camera.
There are also two files in the photo folder.
Has anyone met such a problem?
I remind this state a wile ago...
i know no way to fix it yourselfWhat did FLIR charge to re-flash your E4 please ? This information may be useful to others who end up with a unrecoverable bricked E4.Hello,
The Camera is still by FLIR. I hope to receive it in the next 2 weeks.
Hat i have done:
1. Set Camera in RNDIS mode
2. open "FLIRInstallNet.exe" from /bin folder (FLIR Tools)
3. Download old firmware (flir_ex_pn639_v1.18.7_update_pack.zip) from somewhere in this forum
4. flashing the "Z3comb_v1.18.7.fif"
5. Camera restarts later and was found as new Volume (ASCO 23.9MB)
6. only the FLIR logo was shown and the Asco volume... that's it.
I tried to use the hardware UART with "usbfn RNDIS" but nothing happens.
I copied the files inside the ASCO Volume (see attechment). If I store files there and restart the Camera, the files are disappeared.
I have the theory, that FLIR store some command file there and if the Camera restarts they have additional a working RNDIS mode for reflash.
However, they don't will let us know this...
I was lucky to get the Flir wide angle lens with 45° fov for $500 on ebay recently and it came even with a tools+ licence, a ResearchIR sw key and a tripod adaptor.
And this lens improved the optical quality of my E30 considerably, the slight focal error on the left side of the picture is gone with this lens.
Besides this lens allows to get even closer than 5cm to an object and still get it into focus.
@BigBird007:
Congratulation!
I am going to buy E4 that was made last month, so I expect the firmware will be higher that 2.3. So, can you confirm it is possible to make a fully working hack without downgrading?
Thank you
@BigBird007:
Congratulation!
I am going to buy E4 that was made last month, so I expect the firmware will be higher that 2.3. So, can you confirm it is possible to make a fully working hack without downgrading?
Thank you
I am attaching the modified script package (removed e6 files, as they seem to work slightly differently at first glance)...