Here is the excel sheet I made for calculating new calibration parameters, if anyone wants to play around with it. (Sorry for using commercial software.)
The LCD is protected behind a glass or high-strength composite shield.
I'm not going to go through the hassle of returning the entire unit unless the issue gets worse, nor will I open it up to massage the panel. I did consider that, but the protective cover got in the way. Complaining about it makes me feel a little better though. =)
Mike provided a "remove hacks" firmware option in the download, so it should be possible to restore it factory-fresh.
Here is the excel sheet I made for calculating new calibration parameters, if anyone wants to play around with it.
>php flir.php -i FLIR00??.jpg --msx --pip
>php flir.php -i ./in/FLIR00??.jpg -o ./out --msx --pip
>php flir.php -i FLIR0049.jpg --resize 200% --pip --msx --tshift 5
>php flir.php -i inputdir/FLIR0???.jpg -o outpurdir --gpx ../gpsdir/gpsfile.gpx --gshift +15 --msx --pip --rmin 10500 --logo sometext
My E4 did some huge time deviation (2 minutes in 1 hour), after freeze and reboot it returned to normal. Anyway, was very hard to remap to correct position. Seems deviation was not linear, it made gaps between some photos. Maybe time is software computed, only on reboot synched with RTC.>php flir.php -i ../in/FLIR016?.jpg -o ../out --msx --pip --report
Where can one find the latest and greatest .zip file for the image resolution enhancement?
Thank you.
I can't connect to my camera after the Menu hack, on windows works fine.
I looked at the Flir E4 manual and it refers the user to the CD for specs A bit odd I thought. The E4 brochure is even more evasive on the topic. It states an accuracy of +-2% and a temp range of -20C to +250C with no caveats. Naughty.
The marketing boys have had a lot of input to the documentation me thinks !
The question is, someone else is facing the same problem?
The question is, someone else is facing the same problem?
Did you play with new USB menu ? Need to set first option, otherwise you can not connect as mass storage.
mmm not really, sorry I don't know if I made a language mistake on that statement.
I mean that before the menu hack I was able to establish a connection between FLIR tools and my E4+, after the hack I can't.
On the other hand on Windows I have no problem, and is listed as "Flir USB video"
The question is, someone else is facing the same problem?
I rewrote flir.php for batch process. Dirty quick night job, so I did not tested it too much. Working for me under windows.Code: [Select]>php flir.php -i FLIR006?.jpg --msx --pip
>php -v
PHP 5.3.24 (cli) (built: Apr 10 2013 18:32:42)
Copyright (c) 1997-2013 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2013 Zend Technologies
>php flir.php
Parse error: syntax error, unexpected '[' in E:\temp\Flir\FLIR_E4 - Kopie\flir.php on line 102
@pathinfo($options['o'])['extension']
after readingmmm not really, sorry I don't know if I made a language mistake on that statement.
I mean that before the menu hack I was able to establish a connection between FLIR tools and my E4+, after the hack I can't.
On the other hand on Windows I have no problem, and is listed as "Flir USB video"
The question is, someone else is facing the same problem?Yes, me. I only recently (i.e. post-hack) tried using FLIR tools on my mac and it doesn't see my E4+ (on my work Windows laptop it works fine).
BTW: it shows up as a mass storage device in Finder so I can get at the images that way, but not in FLIR tools.
UVC and MSD
secret menu - hold <right> down for 10 secs in the Camera Information menu
rls -r -l .system
r---r---r----- 0 root root <a> usbconn "high480"
rw--rw--r----p*0 root root <i> usbforcefs 0
[0, 3]
rw--r---r---1p 2 root root <a> usbmode "RNDIS"
["RNDIS" "MSD" "UVC" "RNDIS_UVC" "RNDIS_MSD" "UVC_MSD" "RNDIS_UVC_MSD"]
Yes, me. I only recently (i.e. post-hack) tried using FLIR tools on my mac and it doesn't see my E4+ (on my work Windows laptop it works fine).
BTW: it shows up as a mass storage device in Finder so I can get at the images that way, but not in FLIR tools.
I agree - most likely still set to one of the "other" USB modes - bad setting, only relation to menu hack is that the USB mode got changed (by the owner) to apply the hack - guess why "advanced" users recommendation
a untouched brand new Flir E4 has USB modus
Code: [Select]
UVC and MSD
I don't understand the partCode: [Select]@pathinfo($options['o'])['extension']
QuoteI agree - most likely still set to one of the "other" USB modes - bad setting, only relation to menu hack is that the USB mode got changed (by the owner) to apply the hack - guess why "advanced" users recommendationYes , In my first post I said that I even tried all the usb modes in case I was making bad assumptions.