I must be getting old....
I just received my E4 camera.. Its 1.19.8
I have been reading for 1 hour here trying to know how do i do the 320X240 hack and menu hack.. I found the infos on the menu hack on the first page.. but i was not able to find exactly the hack for the 320X240 resolution.... Is it the menu hack that also adds the higher resolution ?
Sorry if i am being stupid.. . but its so much information here that i got lost a little bit....
I must be getting old....
I just received my E4 camera.. Its 1.19.8
I have been reading for 1 hour here trying to know how do i do the 320X240 hack and menu hack.. I found the infos on the menu hack on the first page.. but i was not able to find exactly the hack for the 320X240 resolution.... Is it the menu hack that also adds the higher resolution ?
Sorry if i am being stupid.. . but its so much information here that i got lost a little bit....
I tried to see on menu any info about the new resolution.. but i didnt find.. its ok ? the resolution is visible better... but on system info all are the same. Is it supposed to change something?
Now i do the ADDMENU-BETA1.zip mod ? is it the lastest better menu function to add ?
THANKS SO MUCH !
I did all the had using the modified e8.cfg
\>
Connected
Installation started...
Adding flashfs/system/appcore.d/config.d/e8.cfg
Camera update completed
Ok
I tried to see on menu any info about the new resolution.. but i didnt find.. its ok ? the resolution is visible better... but on system info all are the same. Is it supposed to change something?
Now i do the ADDMENU-BETA1.zip mod ? is it the lastest better menu function to add ?
THANKS SO MUCH !
I tried to see on menu any info about the new resolution.. but i didnt find.. its ok ? the resolution is visible better... but on system info all are the same. Is it supposed to change something?
Now i do the ADDMENU-BETA1.zip mod ? is it the lastest better menu function to add ?
THANKS SO MUCH !
First get RNDIS/Telnet+FTP working, then MAKE A BACKUP - remember to cold boot after adding and overwriting the menu structure - beta 3 is up3date.
Again: Hz hacking is no priority to me as it will hardly give additional functionality, might introduce noise and for sure it would cause ITAR trouble for Flir - something that nobody wants.
He probably meant 4.2; 3.2V for a standard cobalt/manganese cell is "almost empty".
Stupid Question, I know, but is the flir server accessible via just using the Host (192.168.0.2), username (flir) and password (3vlig)? That is, via filezilla without camera hooked up?
My questions for the group:
- Has anyone retrofit the lens assembly entirely on their e4? Is this a reversible prospect? eg: can I just remove the lens and resemble and have any chance of putting it back again?
- How does one input the flat field calibration data, or perform this cal?
My questions for the group:
Quote- How does one input the flat field calibration data, or perform this cal?Again, see the teardown - the shutter is a self-contained module. You can issue manual cal commands via the console (telnet or serial) to sync with your picture taking.
Ok, I will watch the teardown video. However, I'm not sure that we are discussing the same "cal"; each model lens for any given camera has different performance - on visible cameras this is things like distortion, gain and vignetting... my crude understanding is that the same is true for thermal cameras as well; the edge of the image may have fewer "counts", and different speed lenses will have different planck bias or somesuch for transcoding sensor values into degrees - but my understanding of this is spotty at best. I know flir has an internal tool for lens calibration, and some other camera manufactures have end-user tools for "lens calibration" - but I don't understand the details.
Related: I don't understand why I'm getting bogus readings from some points on the sensor on my e4
Hey guys. Thank you all for the hard work you've put into this thread. I've been playing around with my camera and decided to attempt the hack. When I go to transfer my .fif file in Flir tools I get an error pop up in which I have to abort. When I review the error log I have a
"Error in FIF::UVCCommandDispatcher::AddFile(line:565): The system cannot find the path specified. hr=0x80070003:"
but not sure what to go to check on this.
My questions for the group:
Quote- How does one input the flat field calibration data, or perform this cal?Again, see the teardown - the shutter is a self-contained module. You can issue manual cal commands via the console (telnet or serial) to sync with your picture taking.
Ok, I will watch the teardown video. However, I'm not sure that we are discussing the same "cal"; each model lens for any given camera has different performance - on visible cameras this is things like distortion, gain and vignetting... my crude understanding is that the same is true for thermal cameras as well; the edge of the image may have fewer "counts", and different speed lenses will have different planck bias or somesuch for transcoding sensor values into degrees - but my understanding of this is spotty at best. I know flir has an internal tool for lens calibration, and some other camera manufactures have end-user tools for "lens calibration" - but I don't understand the details.
Related: I don't understand why I'm getting bogus readings from some points on the sensor on my e4
The per-pixel calibration map is available somewhere in the camera, this has been discussed quite a bit. I suspect this is what you need.
Your specks looks to me like dust on the sensor, my E4 was shipped with this feature as well. Easily fixed with a sensor dust blower if you can get the lens off (i took my camera apart to achieve this, but i have since ordered a lens adjustment tool so i can take the lens off without taking the camera apart)