The applaunch.dat file is present after the "update" but apparently it doesn't do anything. At least, it doesn't affect running the modified XML scripts.´
There is one sgn file - applaunch.sgn and inside applaunch.dat is some files lenght and crc. Like that -
# doCRC FlashBFS\system\ui.d\toolbar-config_Z3.xml 1263 2286214514
somewhere something checking them.After thinking all night I tried hack this menu. All files are in E4 anyway from first copy, only those
facet_z3.rcc and toolbar-config_z3.xml do not let him boot... here I found weak point. I replaced
files after boot but before he reads them. And I saw this enhanged menu but all not working and
camera crashed. After that things gone very bad. I lost MSX and measure spot and other stuff.
Make all working again was bit difficult...
The applaunch.dat file is present after the "update" but apparently it doesn't do anything. At least, it doesn't affect running the modified XML scripts.´
There is one sgn file - applaunch.sgn and inside applaunch.dat is some files lenght and crc. Like that -
# doCRC FlashBFS\system\ui.d\toolbar-config_Z3.xml 1263 2286214514
somewhere something checking them.After thinking all night I tried hack this menu. All files are in E4 anyway from first copy, only those
facet_z3.rcc and toolbar-config_z3.xml do not let him boot... here I found weak point. I replaced
files after boot but before he reads them. And I saw this enhanged menu but all not working and
camera crashed. After that things gone very bad. I lost MSX and measure spot and other stuff.
Make all working again was bit difficult...
Ok, i have menu now, but what I must see? I have now 8 color palletes,
scale: auto - lock - unlock and measurement: new delta s and delta t.
But delta s like center spot and delta t like no measurement. And that's all.
My camera is Flir E4 1.2L 2.3.0 from oct. 16, 2014
Wow zoro tools has 30% off today on the E4. 5% more if you use discover. I only got 25% last week...
code: SaveBig
Reflashed firmware 2.3.0 - now lets try something more.How is it possible to reflash 2.3.0 ??Download update from homepage and browse it to FLIRInstallNet.exe and "Run FIF"
But something strange was with resolution hack, it did not run. It patch dll, but Config.cfc was already hacked -
it did backup where was original dll and cracked cfc. But when I looked into E4, that moment was there original cfc.
I uploaded patched from that backup directory.
Reflashed firmware 2.3.0 - now lets try something more.How is it possible to reflash 2.3.0 ??Download update from homepage and browse it to FLIRInstallNet.exe and "Run FIF"
But something strange was with resolution hack, it did not run. It patch dll, but Config.cfc was already hacked -
it did backup where was original dll and cracked cfc. But when I looked into E4, that moment was there original cfc.
I uploaded patched from that backup directory.
Tried the same thing as you, and got the black screen. Which FIF file did you use to fix it?
Reflashed firmware 2.3.0 - now lets try something more.How is it possible to reflash 2.3.0 ??Download update from homepage and browse it to FLIRInstallNet.exe and "Run FIF"
But something strange was with resolution hack, it did not run. It patch dll, but Config.cfc was already hacked -
it did backup where was original dll and cracked cfc. But when I looked into E4, that moment was there original cfc.
I uploaded patched from that backup directory.
Tried the same thing as you, and got the black screen. Which FIF file did you use to fix it?
Download the FLIR Ex (2.3.0) Update Pack and unzip it. It should contain Z3comb_v2.3.0.fif.
Reflashed firmware 2.3.0 - now lets try something more.How is it possible to reflash 2.3.0 ??Download update from homepage and browse it to FLIRInstallNet.exe and "Run FIF"
But something strange was with resolution hack, it did not run. It patch dll, but Config.cfc was already hacked -
it did backup where was original dll and cracked cfc. But when I looked into E4, that moment was there original cfc.
I uploaded patched from that backup directory.
Tried the same thing as you, and got the black screen. Which FIF file did you use to fix it?
Download the FLIR Ex (2.3.0) Update Pack and unzip it. It should contain Z3comb_v2.3.0.fif.
Ok, i have menu now, but what I must see? I have now 8 color palletes,
scale: auto - lock - unlock and measurement: new delta s and delta t.
But delta s like center spot and delta t like no measurement. And that's all.
My camera is Flir E4 1.2L 2.3.0 from oct. 16, 2014
Zoom, 13 color pallets, 7 measurements, picture in picture in image mode is what i have on my 1.22 after update (maybe something more has changed but this is what i can se now after update).
Download the FLIR Ex (2.3.0) Update Pack and unzip it. It should contain Z3comb_v2.3.0.fif.
Unfortunately, mine appears a little more fubar'd. After successfully uploading the FIF file and eFLIRInstall.exe and unplugging the USB after, there's no installation progress displayed on the camera screen. Tried it multiple times. Any suggestions
oh my ... that lens ! thanks for the heads up
flir.php ... so much search result returns :p
No special lens was used - that's a E4 modded with the res hack - but there is a catch.
Your going to need ImageMagick, MS ICE, PHP, EXIFTool, FLIR Tools, and a decent chunk of time.
There is another PHP file here (splitjpg.php) that was used to stitch many images together into a panoramic with MS ICE then I ran the output though the splitphp then FLIR tools then finally the flir.php. It's a bit convoluted but results are . Users here like tomas123 and daves have contributed some insane work on this.
not lens? but it looks sooooo fish eyed ( i tried to read everything ... but my brain is not syncing lol ... i will try experimenting later again)
10% off at Zoro
CPNAF10
Has anyone gotten any of the extended functions to work on the 1.2L/2.3.0? I am most interested in the pallets and the measurement tools. I saw earlier that there were a few working on this..was there any progress? Thanks!
Has anyone gotten any of the extended functions to work on the 1.2L/2.3.0? I am most interested in the pallets and the measurement tools. I saw earlier that there were a few working on this..was there any progress? Thanks!I can tell you how to use new menu files- toolbar-config_z3.xml, design_ui_z3.xml and facet_z3.rcc or whatever files,
but someone must make them. Existing "2.3.0Menu_Upgrade" adds only more palettes- that I can share with You
and I think new E4 do not have many extended functions...
.image.sysimg.alarms -- ends here
.ui.userSettings -- ends here
and so on.
Many stuff needs to be enabled somewhere, like pip, zoom, humidity, insulation, isotherm, spot, arrow, box... shortly - all stuff,
without them we have... only more palettes
As I said, my camera is Flir E4 1.2L 2.3.0 from oct. 16, 2014