Because new users are trying to get a good deal on the camera.
Still waiting on a good coupon code from Zoro.com....
20TODAY coupon is good for 20% off today. Standard E4 for $796 shipped. FLIR.com is also teasing "white hot black friday deals start Sunday" so maybe they'll have some direct deals on the E4 too.
Very excited to get one and hack it if possible.
What's with all the new accounts talking about Zoro and posting multiple different coupons...
And I want to be kept up to date on the amazing work you guys are doing here
Didn't see the 20% coupon but thanks. Not sure if I should wait for black friday or go ahead and get one at 20% off and return this one (that I paid full price on....)
Also that drops the price below the free borescope to the crappy flashlight..... If it were 30% off I would jump on it.
Still waiting on a good coupon code from Zoro.com....
20TODAY coupon is good for 20% off today. Standard E4 for $796 shipped. FLIR.com is also teasing "white hot black friday deals start Sunday" so maybe they'll have some direct deals on the E4 too.
Very excited to get one and hack it if possible.
What's with all the new accounts talking about Zoro and posting multiple different coupons...
Wait for black friday. I am getting my shopping list together to get as much as possible then. Honestly I don't see how they make money on the E4 at that price.
Didn't see the 20% coupon but thanks. Not sure if I should wait for black friday or go ahead and get one at 20% off and return this one (that I paid full price on....)
Also that drops the price below the free borescope to the crappy flashlight..... If it were 30% off I would jump on it.
Still waiting on a good coupon code from Zoro.com....
20TODAY coupon is good for 20% off today. Standard E4 for $796 shipped. FLIR.com is also teasing "white hot black friday deals start Sunday" so maybe they'll have some direct deals on the E4 too.
Very excited to get one and hack it if possible.
What's with all the new accounts talking about Zoro and posting multiple different coupons...
I see where they did 40% off back in 2012 black friday. That would be sweet but I doubt we will see that big of a discount. There was a used E4 on ebay yesterday for $700... but it sold before they answered me about the firmware. Today there is a E30 but at 2,200 I don't think it is that good of a deal. (especially if I could get a new e40 for $2218 if they did do 40% off.
But then again do I need anything more than a E4 for amp repairs... the main thing I will be using it for???
Another 2.3.0/1.2L puppy just got converted here. Observations:
- in RNDIS mode the camera has a DHCP server with address 192.168.0.2 and will assign 192.168.0.1 to the computer
- Installing FLIR Tools does not install USB network (RNDIS) drivers. You can either install them as a separate package (search for flir_device_drivers.zip posted here before by someone) or as part of FLIR Player software (freeware from FLIR web site). Do this before trying to convert.
- not possible to set camera to RNDIS mode via camera's hidden menu. Has to be done using FLIRInstallNet.exe
- DHCP via RNDIS did not work on my Win7 64-bit. When I installed RNDIS drivers and uploaded Set_RNDIS_temporary.fif, the RNDIS driver recognized it and a new network adapter popped up in Windows Control Panel, but DHCP did not work and apparently the overall IP stack did not work, so that new adapter never gets the 192.168.0.1 address, and even if I could go and set it manually on that network adapter, still could not ping the camera or FTP to it. I then tried uploading Set_RNDIS_permament.fif and ended up with a semi-bricked camera in terms of the camera still worked but I could not connect to it anymore neither via USB nor via RNDIS
- uploading Set_RNDIS_permament.fif and rebooting the camera changed the camera mode in the camera hidden menu to RNDIS, but same as for USB the mode cannot be changed from the camera. My guess was I could only revert it to USB if I can connect to the camera via RNDIS and delete the file that was uploaded before. But how do I connect to it if DHCP did not work?
- the solution was to move to a Win XP machine. I have a Win XP virtual machine on my W7 x64. I installed the RNDIS drivers package there, redirected the USB port to the VM and bingo, a new network adapter popped up and a message popped up that camera found on 192.168.0.2
- from this point I was able to ftp to the camera and browse the filesystem, on the XP machine
- installed Python v2.x on the XP and ran the conversion script as per the instructions and rebooted the camera
Man, what a difference!
So do not know if Win7 32-bit would work, mine was 64-bit with the latest Windows Updates, did not work. XP seems to work OK.
As others reported, there is also http access to the camera via a browser, you get a information page with some statistics and version info.
Because new users are trying to get a good deal on the camera.
Still waiting on a good coupon code from Zoro.com....
20TODAY coupon is good for 20% off today. Standard E4 for $796 shipped. FLIR.com is also teasing "white hot black friday deals start Sunday" so maybe they'll have some direct deals on the E4 too.
Very excited to get one and hack it if possible.
What's with all the new accounts talking about Zoro and posting multiple different coupons...
Sure seems like a bunch of spam advertising for Zoro. Never heard of them before and all the sudden 2-3 accounts are mentioning them in their first post.
So we have gemrough, Bud123, and viacom1 all posting about Zoro. All accounts opened within about 2 weeks of each other and all at 11 or fewer posts...yeah, nothing fishy here.
I cant speak for the other accounts but I can say I have no connections with them. I had never heard of them before either. The only reason I mentioned them is their price is a lot less than any where else....(and someone here had mentioned them and a 30% off coupon) Which makes me a little suspicious. Has anyone here actually ordered from them and received their order?
I wonder if Amazon will price match them? If Amazon will, I'll just keep the E4 I ordered from them already.
FYI: I tried to buy at Zoro (at 30%), but they declined my intl. credit card and canceled my order a few hours later - they never replied to my emails. You can only purchase there if you
a) have an US credit card AND
b) have an US shipping address
So do not know if Win7 32-bit would work, mine was 64-bit with the latest Windows Updates, did not work. XP seems to work OK.
I modified my E4 on a Windows 7 pro 64 bit with no problem, I don't think it is the OS as much as how your OS is configured. I did install the RNDIS drivers before I did anything else.
I only used the set_RNDIS_temporary file and all went smooth, I did need to reboot my camera more than once before the new resolution took effect.
Did you use the standalone drivers package? On my Win 7 64 they came as part of FLIR Camera Player install, and i later compared and found they are of a newer version than the drivers in the standalone package. Do not know if that caused the problem with W7 x64 .
FYI: I tried to buy at Zoro (at 30%), but they declined my intl. credit card and canceled my order a few hours later - they never replied to my emails. You can only purchase there if you
a) have an US credit card AND
b) have an US shipping address
You might could order from tequipment.net and use coupon code TETB0805 (5% off) on a E4B for $806.55 after coupon.
Oh no! Now I am going to be accused of working for tequipment.net... LOL
I believe TEquipment.NET also offers a 6% discount for EEVBlog members.
Just to say in Canada E4 is sold for same price as in the US but in Canadian dollar, which is interesting since the exchange ratio is not 1:1. Of course tax applies on top but still.
an old news:
current E4 FW from June 12, 2014
http://support.flir.com/SwDownload/app/RssSWDownload.aspx?ID=196contain two fpga FW
07.04.2014 09:26 632.594 fpga.bin
17.12.2013 08:18 606.097 fpga_lepton.bin
6 month ago Mike wrote:
And a 2nd fpga.bin (fpga_lepton.bin) is added, for whatever.
For products using the lepton core of course.
My bet is the E4 will be replaced with a Lepton based unit.
Once Lepton is in production, why continue using a 320x240 sensor in the low-end product when they have a doubtless cheaper sensor available.
Are there some news about the E4 and Lepton?
The only professional Flir camera with Lepton sensor is the FLIR TG165 .
Hi Guys,
Thank you all for the contribution and help.
I received E4 yesterday from ValueTesters, got $100 discounts when I called them, to my surprise I found that it was
E4 1.1L with 1.22.0 firmware on it.
I just want to confirm that Can I apply the hack "1.21/1.22 firmware hack info" to get it to E8+ level.
Note: *** I am no way affiliated to ValueTesters in anyway ***. Just the info...
Thank you.
Sam.
Yea right... I know you are sitting there at work (for Valuetesters.com) and posting that you got the hard to find 1.22 firmware version just to try and drive up a bunch of orders..... LOL
You should be fine. Go to page 1 and look at the links on the first post. You should be able to find everything you need from there.
As for the E4 being switched to a lepton.... It could happen. But it is not cheap to change the PCB, have new batches made and populated just to save a little on the sensor itself. How concerned are they with the E4 hack... I'm sure some. But honestly I bet the E4 hack has caused more sales for them than revenue lost. My guess is most people looking for an E8 don't know or don't care about the hack.
an old news:
current E4 FW from June 12, 2014
http://support.flir.com/SwDownload/app/RssSWDownload.aspx?ID=196
contain two fpga FW
07.04.2014 09:26 632.594 fpga.bin
17.12.2013 08:18 606.097 fpga_lepton.bin
6 month ago Mike wrote:
And a 2nd fpga.bin (fpga_lepton.bin) is added, for whatever.
For products using the lepton core of course.
My bet is the E4 will be replaced with a Lepton based unit.
Once Lepton is in production, why continue using a 320x240 sensor in the low-end product when they have a doubtless cheaper sensor available.
Are there some news about the E4 and Lepton?
The only professional Flir camera with Lepton sensor is the FLIR TG165 .
I am kinda skeptical that they will just "replace" the E4 with a revamped Lepton based E4 unit. Since the E4 shares to much with the other Ex's I think it's more likely the E4 will just go away and be replaced by something entirely different with a Lepton in it and the rest of the Ex's will march on with the existing sensor tech and higher res. The second FPGA bin file was likely just left in from some testing. They would likely need a less powerful FPGA since the Lepton is already spitting out 9Hz, NUC'ed, and colored frames already - the only thing the FPGA would be needed for would be the MSX side of things.
Many stuff needs to be enabled somewhere, like pip, zoom, humidity, insulation, isotherm, spot, arrow, box... shortly - all stuff,
without them we have... only more palettes
Can you post how to add palettes?
you just need 2.3.0Menu_Upgrade .... which can not be found posted anywhere....
? Maybe it is not a public released hack.
Additional information that i have not seen yet in this thread:
When camera is in RNDIS permanent mode, you can FTP to it even if it is turned off but is connected to USB. However the login is not flir/3vlig. The login credentials in this case are:
user: anonymous
psw: NcFTP@
Once connected (i use WinSCP) you can browse the filesystem, make a backup of the Flash, transfer files 2-way. This may also help if you bricked your camera, if you know which files you want to replace.
Do not power the camera on, just plug the usb cable in to use this login.
It should be possible to even reflash the firmware in this mode (using FLIRInstallNet.exe) if the camera is bricked.
EDIT:
Kids don't try it at home. You have to know what you are doing.
If someone had the files for the firmware "upgrade" to go from 1.11/1.12 to 1.8 (or 1.9 what ever it was) could one not do this and "upgrade" a 2.3.0 to the older firmware?
Its been attempted and the answer is no.
FW 1.18 was released by FLIR ages ago and trying to install in a 2.x fw camera leaves it bricked.
The only known success was on a camera that was upgraded to 2.3 by FLIR during a repair. AFAIK the owner was able to recover it to its former self. Such is blocked by encryption and bootloader in factory 2.x units.
Many stuff needs to be enabled somewhere, like pip, zoom, humidity, insulation, isotherm, spot, arrow, box... shortly - all stuff,
without them we have... only more palettes
Can you post how to add palettes?
Yes, this was easy - next time they make it harder
. I like to add more, but can't hack it to read older files. Trying edit exe and dll files (conf loaded by appcore I see) but there is someones help needed...
__________________________________________
First thing - you need resolution hack
after that - how You like to do
FLIRInstallNet - browse fif file then run fif file
or copy needed files to camera
This all based on other peoples work from this thread and I changed only something in some places.
May be this is not working to all or not at all...
2.3.0_Menu_2.zip [Link lifetime 7 days]
FYI: FLIR is putting on a Black Friday sale that starts on the 23rd, although you'll have to sign up for on their website.