The 200MHz HK TEXAS probe seems quite nice; makes beautiful, crisp and symmetrical sine, square & sawtooth waves on my old 20MHz gen right out of the baggie with no adjustment. Just like my 100MHz cheapies, and the ones that came with my 1054Z. The BNC adapter ferrule that came with fits snugly, doesn't try to stay stuck in the BNC.
I ordered a pair of 200MHz probes from scopewa. Should arrive around the same time as my SA.
Yup... that's where I got my P6100s from. Think they cost like $13/pr a couple years ago. What'd you get, the
Lihuada P2200s? I have one of them on the way from another vendor in Taiwan; I had no "hunger" for it, so was perfectly happy waiting a month to get it for $8.
When they get here we can compare pics and notes.
Got some pr0n shots of nixiefreqq's favorite type of calculator.
Oooohhh.... THAT is a fine example of the breed. The case reminds me of the one from my grandfather's AC-corded Norelco shaver decades ago...
Much as I loathe Yoda-speaking calculators, I still got a bit of a nerd-boner from that.
mnem
*Imagining Oculus opening that up, just like in the briefcase scene from Pulp Fiction*
Rumours of my death have been much exaggerated. At least I presume there were rumours, I tend to attract them.
Work has been keeping me too busy for TEA related activities, while at the same time generating lots of spare cash that just begged to be spent. Unfortunately every time I've had a chance to look up there hasn't been anything worth buying - until this week. Delivered today, one HP 3325A Synthesized Function Generator.
Obligatory photo with frequency counter in the background showing the usual boringly good accuracy for a bit of old HP kit that probably hasn't seen a cal lab in 20 years.
Congratulations on not being dead!
Congratulations on not being dead!
I may yet be. SWMBO is away visiting her sister and that 3325A is, how shall I put it, quite roomy through the hips. So I may get marmalized when she gets home.
Top ten excuses from my playbook to avoid marmalization:
1. It was free and too good to let go in the skip.
2. I found it on the side of the road. You’d save a puppy if you saw it on the side of the road right?
3. It’s not as big or as expensive as your shoe collection.
4. I swapped it for something else that never existed because you pay no attention to what I have.
5. Look it has festive LEDs/neons/nixies.
6. It will look nice as a centre piece in the living room especially with a scope on top of it.
7. I’ve signed up for ebilling on my credit card so you can’t see the bill because it’s your birthday soon.
8. It also filters the air in the room.
9. It’s cheaper than the gas central heating.
10. I want a divorce.
You forgot good old bribery!
@
Cerebus Congratulations on your return just to prove to everyone that at least you haven't gone silent key and perhaps to ensure you stay that way a bit longer may I strongly suggest that you don't attempt to use excuses 3 and 10. That HP 3325A sure looks pretty impressive, well done in napping it.
It looks like an unbleached wool blanket. Those look a bit scruffy.
Well, do not tell her "at least it is narrower than your hips!" That will lead directly to option 10
My method to avoid marmalization:
Stay single.
Neat. When I get to Canada, I'll hit you up about mailing you my P2200, P6100s and my HK Texas probe so you can nuke them too and see how they compare.
Sure anytime. Shipping should be cheap since I'm also on the east side of canada.
These are great, Kosmic! Thanks for running the tests. What is the noise source that you used. I know there are downsides to using one, but it'd still be useful for when my spectrum analyzer arrives since I don't have a scope with as much bandwidth as yours.
I use a cheap BG7TBL noise source. I think you can get one for less than 20$ on ebay. Working fine but they tend to overheat. I always cool it down with a fan.
Tektronix P6106 250Mhz
Really poor results from the P6106. I'm starting to think that the probe is broken.
Frequency response of the P6106 (Teal) from DC to 500Mhz, 50Mhz per division. Noise source in purple.
So after reading the manual of the P6106, I found how to do the high frequency adjustment of the probe. There is 4 trimmers hidden inside the probe.
After the adjustment the frequency response was a lot better (less attenuation).
Frequency response of the P6106 (Teal) from DC to 500Mhz, 50Mhz per division. Noise source in purple.
I'm such a dumb ass. I should have known better, and I knew better. I also never needed nor wanted one. Even less for what I paid for it. I always took pride in retaining a last bit of sensibility. And then that. And it's not even working! It is cold comfort that I can put the blame on you. Yes you! It is you who kept telling me that every TEC (Test Equipment Collection) must have at least one.
God's messenger dropped it half an hour ago at my door. The unexpectedly small and light bugger came wrapped in I-don't-ever-want-that-again. We all have seen an amazing variety of packaging options, but this looks like the seller wanted to get rid of some hazardous waste.
After disposing the 'thing' (which easily filled my trashcan) and washing my hands not only once, I took a quick look at my new acquisition. At least it still has its feet, and the outside is reasonably clean and unmarred. Only the print on the buttons disintegrates.
I should rename myself to Roger Dimwit.
Good score!
Let's hope the only horror show part of the deal is what you already threw away!
Not Roger; Darryl... And med can be your brother Larry, and I can be his other brother Darryl...About halfway through my liver cheese & onion sandwich, I noticed a funny texture... Keeping it TEA: Yes, that is the 10 x 0.10mm stranded wires in the $1.89 alligator wires from MPJA. I'm not worried; as they each take their turn being the "fusible element" in my electronic tinkery, I'll upgrade the remaining bits with better wire and eventually end up with 5 or 6 good ones. Until I burn the alligators and boots off of those, and start the cycle all over again.
mnem
It's the "Circle of Life", but with magic smoke and wrinkled-up-nose-face.
My method to avoid marmalization:
Stay single.
Wish I knew that sooner
Currently lurking in the car in a hospital car park on eBay browsing test gear. What could possibly go wrong?
Just a little extra cellulose. Good for the bowels.
Rumours of my death have been much exaggerated anticipated (mnem ). At least I presume there were rumours, I tend to attract them.
Work has been keeping me too busy for TEA related activities, while at the same time generating lots of spare cash that just begged to be spent. Unfortunately every time I've had a chance to look up there hasn't been anything worth buying - until this week. Delivered today, one HP 3325A Synthesized Function Generator.
Obligatory photo with frequency counter in the background showing the usual boringly good accuracy for a bit of old HP kit that probably hasn't seen a cal lab in 20 years.
Welcome back to the nuthouse, old friend. It is truly good to see you hale and hearty.
Congratulations on not being dead!
I may yet be. SWMBO is away visiting her sister and that 3325A is, how shall I put it, quite roomy through the hips. So I may get marmalized when she gets home.
I promise I will take that marmalade and make wine of it; then drink to your memory if it comes to that.
But
somehow, I expect you'll manage to sweet-talk your way out of it.
Top ten excuses from my playbook to avoid marmalization:
1. It was free and too good to let go in the skip.
2. I found it on the side of the road. You’d save a puppy if you saw it on the side of the road right?
3. It’s not as big or as expensive as your shoe collection.
4. I swapped it for something else that never existed because you pay no attention to what I have.
5. Look it has festive LEDs/neons/nixies.
6. It will look nice as a centre piece in the living room especially with a scope on top of it.
7. I’ve signed up for ebilling on my credit card so you can’t see the bill because it’s your birthday soon.
8. It also filters the air in the room.
9. It’s cheaper than the gas central heating.
10. I want a divorce.
I REALLY like
number 8... I'm gonna use that next time she says something about my rebuilt PC being too bright in the corner of the living room.
Just a little extra cellulose. Good for the bowels.
mnem
It's true; I do need more fiber in my diet.
Well, I've had a little bit of time to have a proper play with that HP3325A. I'm currently watching a 0.01Hz sine wave crawl across my scope. Rock solid all the way from 0.001 Hz to 20 MHz to better than 1 ppm frequency accuracy with a nice clean sine wave. The 20-60MHz output on the back is a bit ropey and un-sinewave like, but is still spot on frequency wise. Good waveforms on the triangle, square and ramps too. I haven't tried out the external amplitude modulation or phase modulation yet - I can't currently think what use I'd make of those except possibly for impromptu pirate radio on the AM band.
The built in sweep works well in both linear and log modes. It's got a 10V sweep control voltage output that you can use in XY mode with a scope (and a Z blank output too). That's presuming you have a scope with a decent XY mode, which basically implies an analogue scope, which I currently don't. Oh dear, looks like I need to buy one...
Two hundred sobs well spent I think, certainly better than anything new I could have got for twice the money. Oh, and a huge rarity here - all four feet complete with tilting bails.
For those of us that bought one of that batch of TTi TF930 frequency counters a year or two back I can now confirm that TTi's claim that the TF390 can measure down to below 0.001Hz is likely to be true - technically I've only tested it down to 0.001Hz but that worked just fine.
I am NOT going to be testing the HP 3325A's claim of producing a 1µHz sine wave as I don't have any sane way of measuring that. That's a zero crossing every 5 days, 47 minutes, 13 seconds and 333,333.33 µS. Couldn't even have a rough result until midweek, even if I started now.
It's true; I do need more fiber in my diet.
I'd have thought that you got enough: knight's armour, lances, horses complete with tack, that sort of thing.
Well, I've had a little bit of time to have a proper play with that HP3325A. I'm currently watching a 0.01Hz sine wave crawl across my scope. Rock solid all the way from 0.001 Hz to 20 MHz to better than 1 ppm frequency accuracy with a nice clean sine wave. The 20-60MHz output on the back is a bit ropey and un-sinewave like, but is still spot on frequency wise. Good waveforms on the triangle, square and ramps too. I haven't tried out the external amplitude modulation or phase modulation yet - I can't currently think what use I'd make of those except possibly for impromptu pirate radio on the AM band.
The built in sweep works well in both linear and log modes. It's got a 10V sweep control voltage output that you can use in XY mode with a scope (and a Z blank output too). That's presuming you have a scope with a decent XY mode, which basically implies an analogue scope, which I currently don't. Oh dear, looks like I need to buy one...
Two hundred sobs well spent I think, certainly better than anything new I could have got for twice the money. Oh, and a huge rarity here - all four feet complete with tilting bails.
For those of us that bought one of that batch of TTi TF930 frequency counters a year or two back I can now confirm that TTi's claim that the TF390 can measure down to below 0.001Hz is likely to be true - technically I've only tested it down to 0.001Hz but that worked just fine.
I am NOT going to be testing the HP 3325A's claim of producing a 1µHz sine wave as I don't have any sane way of measuring that. That's a zero crossing every 5 days, 47 minutes, 13 seconds and 333,333.33 µS. Couldn't even have a rough result until midweek, even if I started now.
Yep, you got a good score for sure
I also concur with the TF930 counter, a very nice piece of kit that, it kick started my growing collection of TTi test gear, theres something warm and comforting about having some decent home grown test gear that actually lives up to its claims